Sapphire RX 480 Nitro+ pulling 275watts.
My RX 480 Nitro+ 8gb is weird. It comes with a stock clock of 1168mv, HWinfo reports actual voltage as 1175mv-1180mv average and can go as high as 1194mv.
I decided to overclock core to 1390mhz increase power limit to +50%, increase memory clock to 2250mhz, use stock voltage and run the "UserBenchmark" benchmark to see how well it competes with other RX 480 cards. To my surprise HWinfo recorded GPU core power at 235w and my kill-a-watt showed that my whole system was pulling 380w. But when I use 3DMark Firestrike GPU core power stays at 140w and my whole system is pulling 260-280w from the wall.
So either the UserBenchmark squeezed every single possible amp out of my card or my card just went crazy. I know that when RX 480 came out some reviewer said that when overclocked the card can pull 210-220w (not sure if GPU core power or something else).
I am pretty sure that my card just hit the 275w. But atleast I got 79.3% which puts me currently on 9th place which means absolutely nothing.
Posted Mar 13, 2017, 6:56 PM UTC · edited
One thing to keep in mind also is that the Firestrike GPU test uses very little CPU. So if you measure power at the wall in it, your CPU might not be using its full power.
But yeah, overclocking and increasing voltage will consume significantly more power.
I know but HWinfo reports 100w increase for GPU core power and kill-a-watt reported 100w more for whole system so all of that extra 100w came from the GPU and not from the rest of of my system.
Also I did not increase voltage. In matter of fact voltage was exactly the same for 140w in 3DMark Firestrike and 235w in UserBenchmark. Amps flew through the roof.