r/Gunpla•
_robotical

[beginner] Finished my first build: HG Lunagazer!

BEGINNER
[beginner] Finished my first build: HG Lunagazer!

Posted Apr 7, 2017, 2:59 AM UTC

478
CaptainBenzaAsk questions, receive long answers.•

Welcome to the hobby! I hope you stick around, improve and continue in the journey of gunpla addiction.

CaptainBenza Posing CopyPasta Attack!

I highly recommend these resources:

  • Gunplanerd for a great tutorial that goes step by step with explanations and little tips too. It also gives you a good idea about how to think about posing which are very helpful.

  • Lightning-Ace for fantastic examples. Replicating his poses even for different kits than the ones shown is great practice and a source of ideas.

The two usually posted:

  • These, which some have pointed out are actually a Robot Damashii. They're basically action figures and specifically designed to be very posable. When working on your own gunpla, keep in mind that every gunpla doesn't have the same range of motion and some poses might be genuinely impossible for them to make.

  • And this picture which is probably posted the most. It's useful but fairly simple. You'll probably want to do more than just stand your kits in the long run.

Enjoy!

3
_roboticalOP•

Though I didn't see any rules against this, sorry if hijacking the first comment to ask some questions is frowned upon here!

I'm too nervous to panel line this guy, but I think I want to panel line whatever I decide to build next. What do you use to clean up panel lines though? I've seen people saying erasers, but would a kneaded eraser work? And what color markers would you panel line light blue, green, teal, or purple parts with?

How do I fix loose joints and other pieces that have trouble staying put together? The left arm is particularly loose and falls out a lot, but some parts of the waist are fairly loose too. Are there any non-glue methods to fixing this?

When watching a fast build of this kit, I saw the builder cut the front skirt piece into two despite the instructions not saying to do that. It looked like doing that didn't really effect anything and just added some movement/new posing possibilities, is that correct, or is there a reason to not deviate from that part of the instructions?

And do kits usually or occasionally come with extra stickers and/or additional polycaps?

Thanks in advance!

2
Whiskeyjack19•

I just use q tips and rubbing alcohol to clean up panel lines. Any smears left on the plastic can just be wiped off with your finger afterwards. Depending on how dark the shade of blue, green etcetera I use either gray or black, usually black.

Cutting the front skirts in two is just for better posing options.

You almost always have extra polycaps left over but usually you use all of the stickers on an HG. The Lunagazer is one of the few that gives you options for what sticker you want to use. And who doesn't love options right?

3
Roam_Hylia•

It's a great first effort. Welcome to the club!

While I'm not sure specifically regarding HG kits, there are often a number of Decals and polycaps left over from builds so that's nothing to worry about.

As far as the front skirts, if both sides of it are a single piece then cutting the cross-bar in half would open up possibilities for more organic posing. Once you're a few kits in you'll start really seeing options for improving the kit. The instructions cover base assembly but in the end it's your kit. Do what ever you like to it!

For my panel lines I've just been using the good ol' Gundam markers. Gray for white and lighter colored parts, black for dark colors. Any lines that are out of place I just wipe off with my finger with no issue.

Once final note would be on nub removal. If you plan on staying with the hobby for a while I recommend you have some good quality nippers to cleanly remove your pieces from the runners. A good hobby knife (x-acto etc) to shave off any leftovers from the part. A file to level it off and various grits of sand paper to finish it off. (I start with an 1800 grit sanding pad then use nail buffers to bring it back to the same sine as the rest of the piece) I spent about $30 on my nippers and about $20 combined for all the rest.

It's all really dependent on how far down the rabbit hole you want to go. Your first kit looks awesome and here's hoping for many more.

3
RicanStar21•

Awesome, I'm beginning my first build this weekend!!

HGUC RX-78-2

2
_roboticalOP•

Thanks! I hope you'll enjoy your first build as well; I've heard the RX-78-2's a great kit!

1
RicanStar21•

So far so good.

These little decals will be the death of me lol

1
lol325•

this is one of my favourites as well and ur build looks great, looks just from the anime! the detail is insane, might just have to pick up another one of this kit and do a custom on it :)

1