Alright. I am pretty confident I have this down, but I just want to make sure I am getting this right. I have an lg (he2?) Pink. Its a 30 amp battery. As long as I do not exceed 30 amps at 4.2 volts, It is considered safe, correct? I will be using ~.14 dual coil on a Rig mod. I just don't want to blow myself up. Can I just get confirmation?
Posted Apr 18, 2017, 5:25 AM UTC
if you're sure the battery is authentic and you checked your build on an ohm reader or regulated mod to make sure there are no shorts and the ohms are right, go ahead. Well in the safe zone.
edit: which one of these is it? https://www.e-cigarette-forum.com/forum/attachments/img_4813-jpg.643937/
Its the HB6. I was too lazy to get up and look.
Nice. I use HB4 and they can take anything lol. Just don't get too crazy and use too big of a coil
Yeah, I'm using a dual 4 wrap fused clapton. Not too big at all
Yeah that's a piece of cake for that battery. Right now i'm using 5 wrap aliens at a tad above .1
jes, its save, dont worry, because, the mod itself have a resistance
I doubt its actually a 30 amp battery, but you should be fine around a .14 build. The ideal range is around .25 - .5 just because ramp up time and such and safety.
Mooch says its 30 amps bud.
I only said that as you said lg he2
I gotcha. Haha sorry if that came out bad. It was the pink lg's.
HE2 are red and 20A. The only pink LG I know of that we use for vaping are HB6 which ARE 30A cells, but are overkill for what your drawing and at the cost of battery life.
You probably want Sony VTC5A, they seem to be the best cell in the 0.1-0.17 region now.
Yeah they are the hb6's. I just got too lazy to get up.
http://www.steam-engine.org/ohm.html
0.14 for each coil or combined?
Yes- check this op. Is it a single coil at 0.14 that you will be running two of, or a pair of coils at 0.28 each?
.28 each. Dual ohms out to .14