Flashed RX 480 Nitro+ to RX 580 - Superposition Bench results
I flashed my RX 480 Nitro+ 8gb card to RX 580. I used RX 580 Nitro+ bios with 1411mhz boost clock.
I used custom voltages and clock speeds that are 100% stable with original RX 480 bios. And I used the exact same values with the RX 580 bios. Note that I did not modify either bios in any way, both are 100% stock.
| Core Clock | Core Voltage |
|---|---|
| 610 | 818 |
| 910 | 824 |
| 1075 | 925 |
| 1145 | 987 |
| 1200 | 1000 |
| 1260 | 1020 |
| 1300 | 1045 |
| Mem Clock | Mem Voltage |
|---|---|
| 2000 | 1000 |
At first I ran light tests, watched several videos on YouTube. Results surprised me. Everything worked just aswell as always but temperatures and power consumption were noticeably lower. You can check results from here: https://www.reddit.com/r/Amd/comments/66hdr5/flashed_rx_480_nitro_to_rx_580_interesting_results/
I used HWiNFO64 5.51 for monitoring.
It seems that it can't read some things correctly:
- GPU Core Current
- GPU Core Power
- GPU VRM Current In/Out
- GPU VRM Power In/Out
- GPU Chip Power is also weird. At first it looked good but under heavy load the readings were ~40% lower than with RX 480 bios.
I ran Unigine Superposition benchmark at the moment, I might also try Firestrike when I get more time. I did 1080 Medium and 1080 Extreme, both 3 times for each bios.
Results: Superposition - 1080 Medium
| info type | RX 480 | RX 580 |
|---|---|---|
| Score avg | 8070 | 8050 |
| FPS Max | 78 .1 | 78.1 |
| FPS Avg | 60.4 | 60.2 |
| FPS Min | 50.7 | 51.1 |
| Core Clock | 1300 | 1300 |
| Mem Clock | 2000 | 2000 |
| GPU Temp | 73 C | 70 C |
| VRM Temp | 78 C | 74 C |
| Fan Speed | 1148 | 1167 |
| Core v Max | 1.075 | 1.05 |
| Core v Avg | 1.056 | 1.044 |
| Core v Min | 0.825 | 0.775 |
| Max Sys Pow | 250w | 240w |
Superposition - 1080 Extreme
| info type | RX 480 | RX 580 |
|---|---|---|
| Score avg | 2427 | 2417 |
| FPS Max | 20.9 | 20.8 |
| FPS Avg | 18.2 | 18 |
| FPS Min | 14.5 | 14.4 |
| Core Clock | 1300 | 1300 |
| Mem Clock | 2000 | 2000 |
| GPU Temp | 73 C | 71 C |
| VRM Temp | 77 C | 74 C |
| Fan Speed | 1176 | 1167 |
| Core v Max | 1.075 | 1.075 |
| Core v Avg | 1.056 | 1.044 |
| Core v Min | 0.825 | 0.775 |
| Max Sys Pow | 266w | 255w |
Overall with RX 580 bios I get slightly lower scores but in overall temeperatures and power consumption improve enough to make up for it in my opinion. Ofcourse now I would need to see how they compare with each other when using RX 580's 1411mhz stock clock and voltage.
Superposition - 1080 Medium
| info type | RX 480 | RX 580 |
|---|---|---|
| Score avg | 100% | 99.8 (-0.2%) |
| GPU Temp | 100% | 95.9 (-4.1%) |
| VRM Temp | 100% | 96 (-4%) |
| Fan Speed | 100% | 101.7 (+1.7%) |
| Max Sys Pow | 100% | 96 (-4%) |
Superposition - 1080 Extreme
| info type | RX 480 | RX 580 |
|---|---|---|
| Score avg | 100% | 99.6 (-0.4%) |
| GPU Temp | 100% | 97.3 (-2.7%) |
| VRM Temp | 100% | 96.1 (-3.9%) |
| Fan Speed | 100% | 99 (-1%) |
| Max Sys Pow | 100% | 95.9 (-4.1%) |
Some extra information:
I used Crimson 17.4.3 as older drivers did not recognize my card with RX 580 bios.
Both bioses have exatly the same firmware signature: 0x4D4F544
On normal RX 480 you have two speeds for memory. 300mhz and 2000mhz. With RX 580 bios they also added 1000mhz which also works with my card. Only the max state for the memory can be changed in Wattman.
One of the things I also noticed was that clocks and voltages are also more stable. Before they used to jump around all the time even when doing basic tasks.
Has anyone ever had their RX 480 this calm while idle? http://i.imgur.com/Gce3fzX.png
Posted Apr 20, 2017, 3:07 PM UTC · edited