Upgrading HDD on a softmodded Xbox (to 2TB)

When I got my Xbox it was already modded with an 80GB IDE drive. I believe it is softmodded, no chip or TSOP flash. I want to upgrade it to a 2TB SATA drive (or anything 500GB+ but does it really matter?).

I went ahead and tried to boot a Slayers2.7 disc with a new HDD installed using an adapter, and I only got the "Service needed" screen. I got errors 13 mostly, with 07 and 05 in some situations. I am quite lost.

With error 05 I assume that it means the drive isn't locked and needs to be (its a new WD Blue drive), and that probably means the TSOP wasn't modded, not sure. Bonus question: Is there any way to definitively verify if the TSOP is stock or not?

I'm confused because a lot of the tutorials I've found do tons of different things, some are for cloning an IDE to another IDE, others specifically tackle 2TB drives. Then there's this more informative guide that mentions TSOP and some LBA48 thing/ 137GB limit. There's people using "80 wire" cables, using IDE power cable splitters, all sorts of stuff.

So I'm wondering if anyone here with experience can shed some light on my situation.

I assumed the Xbox would boot from DVD where I could format and lock the drive in Slayers... Does it make sense that I'm getting errors on a softmod? Is TSOP flashing basically what I want? Is there a way to format and lock a 2TB drive without doing a TSOP mod?

Hopefully someone here can help!

Posted Apr 20, 2017, 8:29 PM UTC

412
staxx75•

Ok, I just recently upgraded to a 2TB so I will tell you all I know (I am assuming your Xboxes are V1.0 to v1.5).

  1. Without a chip, you have to TSOP with a bios that has LBA48. If you use Hexen for example you will choose a TSOP that has F and G extended. When your bios has been TSOP then you don't need to unlock your 2TB drive.

  2. You must use a 80 pin IDE cable else the drive will time out.

  3. With Hexen or any other bootdisk you can install a clean softmod (say Unleash X or XBMC).

  4. It is very important to use XPartitioner 1.3 to partition the F and G partitions (mine I did equal partition about 928GB each) and that the cluster size is 64KB. If you don't do this then you will get lots of issues with files writing over each other due to the clusters.

  5. Get the Modified UnleashX files in a previous post (many thanks to JRocky5) so that your UData/TData will not hit the 255 file limit. Basically in UnleashX when you have a game in the games directory, it will create an icon in the UData/TData folders and once you reach 255 folders, your XBox will not run any newer games you FTP over. Please look for my post titled "UData and TData folder limit 255"

  6. You can get by without a TSOP but ONLY if you have a modchip.

3
ghrayfahx•

On softmod you HAVE to have a fully working system as far as the Xbox is concerned. That means you have to have both drives and the HDD needs to be locked to that eeprom. You will have to use something like Chimp to clone the drive and lock it. I'm not personally sure how well such a large drive will do with a softmod. I don't think it would work too well, though. Just my personal opinion on that part.

2
Derf_Jagged•

I think he could backup his EEPROM and use XboxHDM to build a softmodded drive if he doesn't have a splitter cable to power the second drive for Chimp.

2
davepyne•

I've got a 2TB SATA drive on a softmod. Works perfectly. xbox version 1.6

1
ghrayfahx•

Ok, then that's good to know!!

1
Derf_Jagged•

I believe a SATA drive needs an 80 pin cable.

1
ixitomixi•

From what I've read this seems to be the case.

1
massReducedOP•

Why is the 80 pin cable needed? wouldn't it act the same as the original 40 pin one since it just happens to be backwards compatible and not actually utilizing the entire thing?

1
AlbinoSheepDawg•

80wire cable has higher transfer speeds. Look at the difference is transfer speeds between 40 and 80.

I am not 100%, but I bet is has to do with SATA not liking the super slow 40wire cables, but that's just a guess

1
ixitomixi•

Its pretty much as u/AlbinoSheepDawg said its to do with data speed as the 80 wire has double the data transfer (theoretically)

1
AlbinoSheepDawg•

You are 100% correct.

1
ixitomixi•

TSOP if its not 1.6 and then just slap your new HDD in with no issues.

1
massReducedOP•

late reply but... what happens if it is 1.6?

1
ixitomixi•

You need Modchip or use Chimp (check the wiki)

1