r/buildapc•
igmarn

New Ryzen build issues

Right so let's start of with my specs:

Case: Corsair spec 03 Mobo: MSI B350 PC Mate CPU: Ryzen 1600 With stock cooler RAM: Kingston hyper X Fury 16gb (2x8) 2666Mhz GPU: MSI Armor 1060 6GB PSU: Corsair RM550x Storage: 1 Samsung 850 evo 250gb SSD 2 wd blue 1 TB drives

(and a cd drive)

Right so after assembly (First time building a complete PC, had no difficulties though) i tried to turn the system on, all fans seemed to start spinning, all LEDs worked, mouse and keyboard lights turned on, but nothing appeared on the screen.

After powering off and trying it again i noticed the following:

At start up all fans go on, however for a few seconds the EZ LED debug light went on, then after 4 seconds or so it turns off. Then after roughly 8 seconds the gpu and vga EZ LED debug light turns on and the GPU fans stop spinning. I also noticed that sometimes the boot EZ LED debug light turns on but this seems random.

Any idea what i should do?

Posted May 27, 2017, 2:38 PM UTC

17
WeShouldGoThere•

Make sure you have power properly connected. Perform a BIOS (UEFI) manual reset.

1
igmarnOP•

Can't get into the bios, already cleared the cmos (at least i think it worked).

Power seems to be fine, can't find any loose connections. I also checked using a different GPU and the fans on that keep spinning but the same happens to the lights...

1
Florisje•

I wouldn't start messing around and risk losing your warranty. I would just email the store you bought it from or email MSI.

1
igmarnOP•

You think it's a motherboard problem?

1
Florisje•

I assume, if it was a bad windows install, the debug would still work. Something is preventing the debug from working.

1
blackaosam•

Did you plug the video cable to your GPU (Monitor to GPU and not MOBO ) ?

1
igmarnOP•

Yes it was connected properly

1