Amerikaner83•

nice!

1
HydroRaven•

What a great idea!

1
newtolou•

What did you use to control the lights? I'm at a loss on how all of this works still. I want to do something like this and have been almost ready to settle on the Lightify Gardenspot.

1
timstreetOP•

I use xLights to do the color changing. https://xlights.org/

This allows me to program multiple effects, color changes, and scheduling. xLights is primarily used by the DIY Christmas lighting community. It may be somewhat overkill for this project but since I use it extensively for Christmas lighting, it works great.

xLights is well supported and documented with a great community. Works on PC and Mac.

1
newtolou•

What controller hardware do you use? xLights looks like it could be a fun program to tinker with.

1
timstreetOP•

I used an ESPixelStick controller for this. Here's a link with information. Falcon makes one that mounts on top of a raspberry pi: linked here

1
Yankton•

Would love more info on this mod. Such as, are they still solar powered? if not, could you post that process? I very much want to do something similar and it looks much easier than trying to route conduit and such for path lighting. Beginner concerning electrical work.

1
timstreetOP•

These are no longer solar powered. The power wires are buried under the mulch and can be seen towards the end of the process. The power is low voltage (12V DC) and is powered essentially by a PC power supply. The lights (8 of them) are chained together. Each pathway light has 9 LEDs for a total of 72 LEDs. They are insanely bright. Here's a link to the ones I bought on AliExpress.

1