B350M Mortar stable firmware \w 1006 AGESA
msi.com/Motherboard/support/B350M-MORTAR-ARCT...Posted Jul 10, 2017, 11:08 AM UTC
Posted Jul 10, 2017, 11:08 AM UTC
Anyone having luck hitting 3200 with Corsair LPX kits?
I could hit 3200 before this already (on 1.0.0.4 or whatever it was before), but it didn’t boot 100% of the time with 5 attempts. I might be getting ahead of myself, but it seems to me like this time it is consistently booting up more often on the first try, although not 100% of the time still.
Also, the boot times improved slightly, when memory overclocks successfully. Nothing groundbreaking.
i can barely hit 2800 with my Corsair LPX 3200 CL 16 kit
Corsair's LPX kits are hit or miss. Some have Samsung B-Die, some have SK Hynix.
The B-die tends to hit 3200 no problem. The SK Hynix, as you can imagine, usually hits 2933, rarely hits 3200, and sometimes only hits 2667.
Mine (CMK16GX4M2B3200C16) has Samsung E-die. 2933 CL14 rock solid, but garbage on 3200 CL16. The former wipes the floor with the latter in various benchmarks... if and when I can get them to even complete on the latter without crashing.
Just hit 3200mhz at cl14 timings. Also slightly OC'ed my 1600 to 3.5
Got my LPX 32 gig to 2933 with A-XMP. No issues yet.
My LEDs (CMU32GX4M2C3000C15) now also work @2933 A-XMP2 with no issues (so far;).
YES! My RAM is finally running at 3200mhz, even got the timings down to 14-14-14-34.
Finally.
Sweet 3200MHz (Could only run at stock 2133 before this update)
Just enabled A-XMP Profile 1 and it worked
further feedback: boot times did improve, the delay from the fans spinning up to max>regulating>proceeding to BIOS was reduced.
some auto voltages on this new BIOS version are different from the previous version, SOC voltage is lowered to .848v and that plays a big part in booting with faster RAM. bumping SOC voltage to 1.0 allowed me to recover stability at 2933 c14. could not repeat that one boot at 3200 c18 though, for lack of time i'll leave it at 2933 for today.
if you're having trouble using settings from the previous BIOS version with this update, check your voltages.
more testing tomorrow.
After flashing, I noticed my stock 1600X was holding some bizarrely high voltages (1.35 - 1.44) and was clocking up to 4.1 constantly just sitting on the desktop. OCed to 3.8GHz 1.275v to avoid that.
Not sure that this BIOS is 100%. Boots better for sure though.
Arctic
Link for non-Arctic version:
https://www.msi.com/Motherboard/support/B350M-MORTAR.html#down-bios
thanks!
I'm running with the 1.54 beta @2933MHz (Corsair LPX). Is it worth to flash the official one ?
[deleted]
Thank you. Probably because the beta bios is also based on AGESA 1.0.0.6.
Took them long enough. Cant wait to run my 3200 lpx ram at 3200.
edit: Would this increase cpu overclocking stability at all?
did it fix the 1.5 ghz bug ?
answering my own question, no its still present cant go to sleep, cpu will lock at 1,5
sleep
What do you mean by this? My new Ryzen 1600X system stopped being able to resume from sleep (suspend to RAM) a couple months back, not sure what it's related to. (No half rate CPU problem here.)
no, its still happening to me
yeah i finally had time to test it, its still happening r5 1600 ...
Hallelujah! They sure took their sweet time. Currently on v1.4, will update and report back in a few hours.
Here's hoping I can get 3200mhz on my Corsair LPX Hynix kit. I doubt it but nothing would make me happier than being proven wrong.
early feedback: 2933 c14 is less stable than it was before. not sure i like that..
on the plus side i managed to boot at 3200 c18...with 1.45v.
hope i can find something that works because otherwise this update was just a whole lot of nothing.
[deleted]
Just posting to let other people know that my 8gb kit "Corsair CMK8GX4M2B3000C15R Vengeance LPX" now work with the second xmp profile (@2933MHz). Before I was stuck at 2666 MHz no matter the settings, xmp on or off etc.
[removed]
Still tweaking and hoping, but so far no improvement for me on my memory (CORSAIR Vengeance LPX). Still can't get it past 2667 16-18-18-18-36. I tried out both XMP profiles and tried a few of the 'Memory Try It!' settings around 2933-3300 but nothing is booting.
Any tips out there, anybody messing with the specific voltages or settings?
Oh wow that's a lovely looking board
Updated earlier, running 3200MHz on my 32GB G.Skill Trident Z (F4-3200C14-16GTZKW) finally.
Still haven't overclocked my 1800X though, need better cooling. But so far it's been stable although in HWM it still shows AGESA 1.0.0.4a, MSI must of forgotten to change that line in the code once again.
[removed]
Successfully edged up my Corsair LPX 3200 (Hyinx) memory from 2667MHz to 2800Mhz, heh. Got it to boot at 2933, stable in Windows, but failed to post again on reboot. 'Gear down' disabled, no help, though now reporting command rate are 2T instead of 1T (in CPU-Z), for whatever that's worth. I went up as high as 1.4V on the RAM, 1.2V on NB SOC, no help.
My bigger complaint is that I stopped being able to resume my system from sleep (suspend to RAM) a couple months ago. Not sure if mobo bios, driver, or other hardware related.
Also, CPU temperature still appears mis-reported at 20C higher in windows, e.g. in MSI command centre, which seems kinda lame.
Awesome, A-XMP profile now works flawlessly with my TeamDark 3000MHz C16 RAM.
I red multiple times in this subreddit that agesa 1006 have some bugs, is this update worth it ?
I wasted 2 hours with this update. I was not able to overclock with it. Went back to previous version.
I have the tomahawk, and with AGESA when I OC the clockspeed never goes above idle speeds..