[OC] [GIF] So hot yesterday we melted asphalt (large gif)
Posted Aug 14, 2017, 1:50 PM UTC
Posted Aug 14, 2017, 1:50 PM UTC
Did the truck go into active or passive ReGen of its diesel system?
Might be talking out my ass here, but it's an American LaFrance, and I don't think those are new enough to have the newer emissions equipment on them.
ALF was technically open till 2014. Emission rules changed in 2010.
You are correct that the Engine in the video is pre emissions just based of the exhuast tip angle.
don't think those are new enough to have the newer emissions equipment on them.
Me neither. I just never thought this was possible, let alone without a regen. Shitty tar job?
looks more like a chip seal I think is what it's called, not as resilient as an asphalt job
Looks like tar and stone. Our old Detroit Diesels would take the sealent off of parking lots. I could see it melting fresh chip and oil.
I don't fault the quality of the asphalt or the workmanship.
The problem is that in Florida, the asphalt is baking in the sun all morning and based on the photos it appears they were there in the afternoon and with the type of complex hose operation deployed, it is safe to say that the apparatus is both stationary, chocked, in pump gear running at idle to 1500 rpm for hours at a time. This is not a failure of the material but simply concentrated heat.
Technically they started changing in 2007.
True but all the custom cab manufacturers waited till the last possible minute. We have a 2011 that is pre emissions because the chassis was built in 2010
At my department in Wisco it's SOP to throw a metal plate under the exhaust. I'm not so sure it has as much to due with the temperature outside as how much a heat a pumper's exhaust can throw!
Same here. The compartment right by the exhaust carries a plate on risers to be put down if we are pumping on asphalt.
Our old 1985 ford quint would always dig a hole in the roads when we ran the pump, that thing was a beast. We were told by the city to put a metal plate under the exhaust.
Sup Florida firefighter buddy?
[deleted]
We we're testing 2 different sizes of hard suction yesterday. It was so hot outside that the exhaust started melting the asphalt and knocking pieces of it up.
Do you guys have an extension hose for the exhaust? That might have helped.
They're attached to the bay.
Sorry, I dont understand. Do you mean you have an extension hose, but you cant use it because it is attached to somewhere?
Like the left hose in this picture is what I meant.
I think what he is referring to is the exhaust removal systems in the bays so the bay doesn't get filled with fumes. None of the departments around me have any kind of exhaust extension to my knowledge.
Yes there's a hose. It's attached to a fan and a filter in the bay.