Cant set initial layer temperature Cura

SOLVED

For some odd reason, whenever I set the "Print Temperature Initial Layer" on Cura, it seems to completely ignore it as it does not even show up on the gcode itself. Any help?

Cura Settings:

Default printing temperature: 200

Printing temperature: 200

Printing temperature initial layer: 210

Here is the gcode: link

Edit: Seeing as I am getting no replies, I am guessing the solution to this problem may be unkown. So If you could try these settings out on your own and report back on what you got, that would be helpful!

Edit: Found the solution, the problem was the standard Prusa Mk2 profile provided by Cura. Go to Machine Settings and replace the Start gCode to

G21; set units to millimeters
G90; use absolute positioning
M82; absolute extrusion mode
G28 W; home all without mesh bed level
G80; mesh bed leveling
M104 S{ material_print_temperature_layer_0 }; set extruder temp
M140 S{ material_bed_temperature }; set bed temp
M190 S{ material_bed_temperature }; wait for bed temp
M109 S{ material_print_temperature_layer_0 }; wait for extruder temp
G92 E0.0; reset extruder distance position
G1 Y - 3.0 F1000.0; go outside print area
G1 X60.0 E9.0 F1000.0; intro line
G1 X100.0 E21.5 F1000.0; intro line
G92 E0.0; reset extruder distance position