r/homelab•
Cyrellis

Finally got an official server!

Discussion

A few months ago I posted this;

https://www.reddit.com/r/homelab/comments/63ezs8/so_this_is_my_homelab/
 

After several months and lots of saving up, I finally got myself an official server! I know it's not that fancy but I managed to get HP Proliant Microserver Gen8 (No Gen10 here)

 

I already had a few projects in mind and they are set up so far. I have two questions for you guys:

1- Where can I get cheap CPU/RAM upgrade for my MicroServer Gen8   2- Besides PLEX etc. What should I do with it?

Thanks!

Posted Aug 16, 2017, 1:19 AM UTC

133
yosoybillbrasky•

1.) eBay. Yeah it's going to be second hand. Doesn't really matter.

2.) Look at running a hypervisor like ESXi or ProxMox. It's mind blowing what you can do. Modularizing all your applications makes the home-lab experience much more enjoyable. A small experimental change in one app won't take down the whole system.

Take the modular approach further. I have a Ubuntu virtual machine as a docker host in my ESXi. Docker right now is running my transmission, sonnar, raddar, home assistant and plex servers.

4
JzJad12•

Would say some hyper visor for sure, just starting out I'd say esxi it's rather simple compared to getting hyper v core, and one of the best things about hyporvisors visors is snapshot ting your vm before breaking it haha

2
QuatrokingHP MSG8 and a lot of other crap•

Welcome to the Gen8 family! I'm ordering a second next week to use as NAS :)

  1. In my current Gen8 I have regular Kingston ValueRAM, which works just fine, just make sure it's ECC. iLo will whine that it's not HP-certified in the web-interface but it doesn't effect performance in any way. As for CPU's, haven't really looked into that yet.

  2. I run esxi with three VM's, running the following:
    -Plex
    -Sonarr
    -Radarr
    -Virtual Radar (for my RTL-SDR setup)
    -Docker
    -Several samba shares
    -Work-related stuff

I'll probably re-do a lot of this however, moving a lot of things to Docker containers instead of running them native.

1
zurar•

Any particular reason to go for a second gen8 when the gen10 is already out there?

I couldn't find any good reviews on the gen10 but I do have that question :)

1
QuatrokingHP MSG8 and a lot of other crap•

The Gen8 is cheaper, comes with iLO (which is super useful) and it has a nice door. I didn't go with the Gen10 because they turned it into some media-oriented thing with dual 4K graphics (really? on a server?) and the stuff. It doesn't help much that their promotion video shows the server with the case improperly attached, either.

Also, and this is very important if you want to run freeNAS: The Gen10 uses AMD, and freeNAS has a history of performing better on intel systems.

I'll probably get one eventually, but for different purposes. Right now the Gen8 just fits my needs a bit better.

1
zurar•

Thank you very much! I think I'll with the Gen8 too. I'll be using freeNAS :)

I have no use for the dual 4k ports at all!

1
QuatrokingHP MSG8 and a lot of other crap•

Cool! The standard G1610T model works great, only thing I had to add was a single ECC DDR3 8GB module so the ram totals out at 12GB. Works fine for the four 2TB drives I have inserted. Do note that if you want to use, say, 4TB drives instead or even bigger, you'll probably want to look a bit further because the Gen8 doesn't allow for more than 16GB of RAM and FreeNAS recommends at least 1GB per TB of drive.

1