Agonizing over Topquilt Selection
Howdy, UL! I just got a new job, and to reward myself I'm taking the next reasonable step toward lightening my pack by replacing an old North Face synthetic bag from 1999 with a down top quilt (1422g). I'm pretty sure I'm going with an UGQ Bandit in Paisley 2 exterior and a black interior. I'm also pretty sure I'm going with 950 goose down to save weight.
Where I'm getting hung up is temp rating. I have a 3 year old boy and a newborn, so versatility is paramount. I need to be opportunistic to get out in the woods and so I'll be camping anywhere from 90 degree sweltering heat down to just above freezing. I live in North Texas and much of my camping will be TX, OK, AR with the occasional warm season trip to Tahoe or the Boundary Waters of MN. I'm a hammock camper and I'll be pairing the top quilt with a 20 degree Underquilt which I find is perfect for all conditions until an UQ is no longer needed.
So I'm tempted to go with a 30 degree to save weight and just layer clothes as I approach freezing temps since I'll rarely be camping in weather that cold. Alternately, everything I read says 20 is the most appropriate for all but deep winter camping and to just vent in higher temps and use a Costco down throw or a silk sheet when it's really hot.
Please help me over think this to death as I want to spend this money wisely and pursue cheaper solutions for the really hot weather.
Posted Aug 22, 2017, 2:55 PM UTC
Is the 950 fill power really worth it? You're spending nearly $100 to save a little over 1 oz. That seems pretty ridiculous to me. I would hope to be saving 5-10oz (or more!) with a $100 investment. Unless you're kit is totally dialed in, I bet you could save more weight elsewhere for that $100.
I think part of the reason the default 20deg quilt is recommended is that Enlightened Equipment is pretty aggressive with its temp ratings. A 20deg EE quilt is a great all-purpose quilt.
With more conservative (and expensive!) companies like Nunatuk or Katabatic, a 30deg quilt might be a fine all-purpose rating.
I'm not sure where UGQ falls on that scale, but you can get a rough sense of it by comparing fill weight for a similar sized quilt (similar length and width).
Either way, given that you mostly camp in warm places, it seems like a 30deg quilt from any manufacturer will be just fine.
On their website they claim to to fill 30% over ENR ratings. If true, that'd put them on the conservative end of the scale.
Thank you for this insight. I was too far in the splurge mindset trying to build the ideal quilt. 950 fill power is not a good value and that money could be better spent elsewhere.
Higher FP improves weight AND compressibility. I just haven't found a way to effectively and reliably calculate the volume savings from one item to another, besides manufacturers product stats/details