r/guns•
frthood

Mauser C96

There are some guys on this board that are far more knowledgeable about antique firearms than I. Could anyone recommend a good place to source a "service grade" Mauser C96 pistol? Preferably in the original chambering, it would be a novelty and would be shot. Gunbroker has been checked, but that site seems sketchy to me and I'm not sure if prices/conditions are accurate and fair. I've always wanted to have a "broom-handle" in my collection.

I'm also a bit concerned as someone on this sub was convinced that the design is inherently unsafe. Has anyone heard anything about this?

Thanks!

Posted Sep 1, 2017, 4:30 PM UTC

812
fluffy_butternut2•

Hoo boy

14
wee0x1b2 | 7-28 #2 ROCKSTAR•

I have one in the original chambering and wish I had a Red 9, to be honest. The ammo is available from Privi but I'd shoot mine more often if it was in 9mm.

The design is safe.

Gunbroker is fine, though I'd prefer to visually inspect something like a C96. A gun show might be a good option.

5
frthoodOP•

I've hear that the fitting with the conversions can be difficult, as they only feed 9mm well with a specific bullet diameter and some (reportedly) require shimming to function reliably.

1
wee0x1b2 | 7-28 #2 ROCKSTAR•

I wasn't talking about a conversion to 9mm.

2
frthoodOP•

OoooOOhh. I checked out Simpson, Ltd. It is a bit expensive, but the condition of their firearms is pretty impressive.

2
TheGoldenCaulk1•

He's great for Lugers too, although his prices for those are even higher.

1
TheGoldenCaulk1•

Gunbroker is safe to use. As far as knowing what prices are fair, it would take some time looking at similar examples that have sold in the past to decide that for yourself. Many sellers are just above market value to make a profit, and some are posting their gun to source an offer that may or may not be lower than the listed amount. Send these sellers emails, most will be willing to talk. Get yourself the Blue Book of Gun Values, as it has a decent amount of information on Broomhandles.

2
SerendipitouslySane1•

Gunbroker is pretty much your only choice for a reliable source of old guns that aren't currently being imported. The price you must pay is acquiring the ability to analyze and identify guns based on limited pictures. You can try larger C&R dealers like Simpson Ltd, but they tend to a) only deal in more expensive, good condition models and b) be overpriced. The c96 is not "inherently unsafe". I wouldn't carry one in 2017, but it's safe enough for range use.

1
frthoodOP•

Thanks for your advice!

1
Catgutt•

Could anyone recommend a good place to source a "service grade" Mauser C96 pistol?

Gunbroker really is the place to go. It's reliable, just stick to sellers who take credit cards.

Preferably in the original chambering, it would be a novelty and would be shot.

If you want a shooter, a 9mm conversion is better for two reasons.

First, it's more widely available. That's a YMMV thing though because 7.63x25 is still made.

Second, shooter-grade guns in 9mm are way more common. Many of them come from China, where shot-out 7.63s were bored out to 9mm and imported to the US. They were often reblued, too. The reboring and rebluing kills their collector's value, so they're cheaper, but they look pretty and shoot well since they typically have good bores.

If you really want a 7.63, you're either going to pay more for a decent-condition original, or you're going to get a shot-out beater. There are some guns that were bored out and relined in the same 7.63, but they're much rarer.

And for what it's worth, the two calibers are very similar and feel virtually identical, since 7.63 is just a bottlenecked 9mm. 7.63 is a lighter bullet going faster. That's about the extent of the difference.

Also, C96s were made in 9mm during WW1 for service in the German military, where they were issued to machine gun and artillery crews, so it's not like it's an ahistorical conversion.

I'm also a bit concerned as someone on this sub was convinced that the design is inherently unsafe.

The C96 is a short-recoil operation where the rearward motion of the bolt is arrested either by the mainspring or, with heavy ammo, by the bolt stop.

Back in the day, people realized that you could load 7.62 Tokarev ammo in a 7.63 Mauser pistol (since the 7.62 Tok was a direct clone of the 7.63 Mauser) and it'd run fine. The issue was that the Soviets produced a wide variety of 7.62 Tokarev loadings, and some of the hotter ones significantly exceed the power of 7.63 Mauser. These pistols beat the shit out of their bolt stops.

If the bolt stop fails, the bolt will go straight into your face under recoil. It might not kill you, but it will certainly be unpleasant.

tl;dr The design isn't unsafe, just check the bolt stop for peening, cracking, or other signs of excessive wear, and replace it if needed.

1
frthoodOP•

Very informative reply, thank you for weighing in. As I understand, you recommend the Chinese "Red 9"?

1
Catgutt•

Yes, but note that 'Red 9' specifically refers to the WW1-era guns produced in 9mm from the factory and having a big '9' carved in the grip and filled with red paint. Sometimes the Chinese guns have repro Red 9 grips, sometimes they don't. You shouldn't be looking specifically for a Red 9, just look for a C96 in 9mm.

1