Should i be worried about this?
[UPDATE] Between this thread and the one i linked below as well as in private conversations, It has basically been unanimous that it shouldn't be an issue. Furthermore, if it was to become an issue it would be covered under warranty. Thank you to those that helped!
Originally posted HERE ? I am looking at buying an 86 or BRZ, I found one that i like at a good deal but noticed This upon visual inspection. My understanding is that casting imperfections are not uncommon and usually not an issue, but there appear to be chunks missing from the pictured location on the left.
Other information
Engine: FA20 out of a 2017 BRZ Part: Timing chain cover on the front of the engine Location: Lower passenger side
The car has been sitting for a while and there is no evidence of a leak ever being there, i am just concerned that this may become a problem in the future. I believe the bolts in the picture are 10mm.
Posted Sep 7, 2017, 7:25 PM UTC · edited
Casting is quite often a bit shit for areas not really too important. What you have seen you do not need to worry about it at all.
Thanks for your reply. So you are saying that the visible cracks and missing metal along the edge of the cover on the left side of the image are purely cosmetic issues and wont develop a leak?
Yeah. They often are like that. It's extremely unlikely that anything will happen at that point.
Thanks! I have looked at 4-5 cars locally to me and they all have the surface imperfections. only one had the missing metal along the edge as pictured, which also happens to be one of the best priced ones. If its really not that big of an issue, i might try and see if i can use it for negotiation.