r/Dodge•
bigity

2015 Dodge Journey A/C Problem

Just today my 2015 Journey started having an AC problem.

Controls and everything work normally, but no cold air is pushed through the face vents (floor and rear vents work normally) on driver or passenger side.

Hot air blows (when AC temp is changed to hot) normally in all vents.

I assume some kind of valve or flap is stuck/bad? I am not a car person so I'm hoping this isn't some kind of completely remove dash problem.

Posted Sep 15, 2017, 5:51 PM UTC

26
RaceCeeDeeCee•

I would say its probably an actuator in the hvac system. They're like servo motors that move the various blend doors. I worked at a dealer and they were a fairly common thing to replace. Dependong on which one it is, it may not be a huge job to replace, but probably more than you'd want to take on if you're not a car guy. If it's still under warranty, take it in to a dealer and they can fix it fairly quickly. We always kept several on hand in parts, because of how common it is.

2
bluecollarswinger•

2015 should be covered under warranty no?

1
bigityOP•

We are over in mileage.

1
bluecollarswinger•

Damn, driving the shit out of that thing! Lol

1
bigityOP•

Well we bought it used a little over a year ago, but 2015 model would have possibly been bought late 2014 maybe? West Texas requires some driving to get to places too :)

1
bigityOP•

I took it to the dealer and they couldn't diagnose the problem before close, but I picked up the vehicle because I have to have it Monday. However, they did run the recalibration procedure and it is now working properly, but they are worried that it isn't a permanent fix.

After dealing with all of this, I remember that I had a major electrical issue repaired under warranty that require the replacement of a good portion of the wiring. I wonder if that issue has cause this one, along with the occasional other quirk that comes and goes (can't recall the error code atm, but it always clears up in a few minutes).

1
bigityOP•

Ugh happened again today. Does anyone know the reset sequence so I can limp along today until I can get this repaired?

1