Broken/loose dome light on NC—how to fix and what tools will I need?
My interior dome light has randomly decided to break—the slider just slides to and fro with no force.
Sometimes it randomly comes on as a result (though not every time it slides into on, maybe 1 in 100 times), so it should still be electrically fine. Just a screw has come lose, I hope. I don’t hear anything moving around so it may just be broken.
What tools do I need to take the light off and try to fix it ? I want to do it safely and without permanently breaking anything. I am very, very risk averse.
I read a horror story about someone paying $500 for a new dome light assembly at the dealership, and I don’t want that. I do know that I need to fix it though or it may just turn itself on one night to spite me and kill the battery.
Posted Oct 3, 2017, 2:32 PM UTC
What part is broken? The switch or the 'dome' (clear plastic)
If the switch, take it apart, you will likely find either a broken piece of plastic (that may be able to be superglued back in place if you know how to properly use superglue) or the metal bar is bent, and needs to be bent back in to place.
Dont worry too much about breaking something, especially if its already broken, as parts on this car are cheap
Since so many NC's are raced, and race cars typically dont have full interiors, its generally easy and cheap to find replacement interior parts from many of the race shops that prepare NC's to race.
It’s the switch—whatever normally holds it in place when you slide it is broken, so it just slides freely.
Take it apart and see if you can see where the metal bent or broke.
Or just replace it...even new the part is less than $25 https://www.amazon.com/Mazda-2006-2013-interior-assembly-NE51-51-310B/dp/B00OL1XQ3C