PC boots with a black screen with GPU plugged in, without GPU it boots normally. Please help.

Open | Hardware

Hi,

Pretty much as the title says, my PC is booting with a black screen when my GPU is connected to the motherboard. This is a new build I just recently started which was working yesterday, however, upon opening it up to install a CPU cooler my PC no longer boots properly with the GPU inside. Without the GPU I see the boot menu then it boots perfectly into Windows without any problems. With the GPU connected I don't even see the boot menu and the screen has no signal for about 10 seconds until it switches on but just remains black.

Can anybody give me some insight into the problem? I'm not entirely sure how to fix it.

Posted Oct 15, 2017, 5:25 PM UTC

18
vinayak_nair•

Did you try connecting the monitor to the internal card and shift the display, or clone to both before disconnecting the internal display.

Connect a monitor to internal, and one to external. Clone display, then select external as primary.

Disconnect internal, reboot.

1
IncredibleBertOP•

You're going to have to simplify that a bit for me, I'm not familiar with these sorts of problems

1
vinayak_nair•

When you plug in a Gpu card into the system , keep the display output connected to the internal card. If it still displays, its using the internal card. Once in windows, open up device manager and check under display adapters, if the Gpu is listed.

Open display properties, select clone displays, which duplicate the displays onto both.

Disconnect the display cable, attach to Gpu. Select Gpu as primary display.

This is only possible if the system boots with the Gpu installed.

Also did you attach the small power cable, to your Gpu. Gpi's now a day's require this.

1
IncredibleBertOP•

When the GPU is plugged in I get a black screen even with the display connected to the motherboard. I literally can't get the PC to start with the GPU plugged in, I have to disconnect it if I want any sort of display to show up on my screen.

Also yes I attached the power cable, the fan spins so the GPU must be switched on.

1
vinayak_nair•

Remove the gpu , plug monitor cable to mobo's onboard output

2)start pc - go to device manager - display - uninstall whichever drivers is

3)restart pc - put gpu back

or

1)go to bios settings - set primary display device to PEG OR PCI E

1
IncredibleBertOP•

I've tried this but when I go to device manager -> display my GPU isn't listed so i can't access the drivers to uninstall them.

I'll try going into my bios settings now.

1
vinayak_nair•

Here are the steps I found to fix the issue on your computer.

  1. Turn off the computer and unplug
  2. Remove Graphic card
  3. Plug the monitor to your video output
  4. Turn on the computer
  5. Click on start and type msconfig
  6. Select the Boot tab and click on the box that says Safe boot with minimal selected. 
  7. Apply then click ok.
  8. DO NOT RESTART.
  9. Shut Down computer and unplug
  10. Install Graphic card
  11. Turn on the computer (should boot into safe mode)
  12. Go into Device Manager
  13. Expand Display Adapter
  14. Disable the Intel(R) HD Graphics 4000 driver. (DO NOT UNINSTALL)
  15. Click the start button and type msconfig
  16. Unclick Safe boot
  17. Restart

The computer will restart normally and will no longer get the black screen. See if that works for you. I didn't mess with any setting in the bios. I am assuming that having two graphic driver install don't like to play well with each other 

1
IncredibleBertOP•

I tried this but after installing the graphics card (step 10) my PC still booted with a black screen.

1