Drill holes in mild steel
Im looking for a solution to drill holes in 1/8" thick mild steel. I use widths from 1/4" up to 8" and lengths up to 24". I would like to automate the drilling process from me standing in front of my drill press all day. The hole size i most need would be 1/8" but would like to be able to use up to 5/16".
Posted Oct 25, 2017, 1:01 AM UTC
111
Is laser cutting accuracy / finish acceptable? You can churn out hundreds very cheaply
Can you elaborate? Most of the material used is cold rolled steel and gets either sanded or media blasted after being drilled.
Laser cut holes are not perfect, but for most stuff they are good enough. Laser cutting machines are relatively expensive when you start talking about cutting the thicknesses you are talking about. You could look into laser cutting shops nearby most will have 11ga(1/8) steel on hand its a pretty common size. Just send them a Drawing. But if you have the volume a laser cutting machine is a very cool tool.
What's considered expensive? Are there any north american manufacturers that make smaller tables? I dont have the space to process sheets. I would also like to keep things in house since we do custom work and a lot of it is a rush.
If i can do more then just holes it opens a lot more possibilities for me.
Table size is not really the driving force in price it seems to be the lasers power rating. I just got a quote on a fiber laser earlier this year. We have a plasma cutter now and would like to jump up to the better accuracy of a laser. Prices have been falling on the technology so we figured we would look into it. Our quote for a 4'x8' table was 150k. That came with everything needed.
It is out of our price range as we don't have the volume to justify it. Table size didn't seem to affect the price all that much. We were hoping to be able to fit the fiber laser to the table we have but they didn't offer that.
We also looked into water jet. I think the smallest "Flow" water jet was aground 70k but the consumable costs are much higher per cut.