Need Advice On Parts

  • What are your goals for your car audio system - as loud as possible (SPL)? Sound quality (SQ)? Some combination of both? Describe to us how you want your system to sound.

I'm mostly interested in sound quality, but I want good bass too. I listen to a mix of metal, rap, and techno, with some pop and country thrown in when the kids ride with me so it needs to sound good across the board.


  • What vehicle? - year, make, model, type (coupe, sedan, SUV, truck, etc.)

2000 GMC Sierra extended cab.


  • What is your maximum budget? (either all at once or over time as budget allows)

I'd like to stay around $500.


  • Will you be installing the gear or will you have it installed by someone else, such as at a shop? If a shop is doing the work, does your budget include cost of installation?

I'll be building and installing myself.


  • What gear is in your existing system? (Is it stock? List any aftermarket gear. If upgrading, list previously installed equipment)

The existing stereo in the truck is junk so I'll be taking it out and starting from scratch. I do have some amps left over from older cars; an 800 watt MTX amp and a couple of Rockfords that I can't remember the specs on right now; so I'll be using those as needed.


  • What is your country of purchase? Leave any finishing thoughts here that you may feel are necessary and beneficial to the discussion.

USA

This will be the first real car audio setup I've done since high school so I could use some advice on what parts to get to build a nice sounding system without dropping a ridiculous amount of money. I'm looking at building a box under the rear seat similar to this with Rockford Fosgate 8" Punch subs. So, first question, how loud are four 8s actually going to be? Are we talking obnoxiously drowning out everything else or just kickass bass? My last car (S10 Blazer) had a 10" Kicker L7 with a cheap amp and it just wasn't enough bass if that helps.

For door speakers, I'm planning on putting 6.5" 2-way speakers in the front doors and 4x6s in the rear doors. I'm not set on Kickers so if anyone has suggestions for similarly priced components that sound better I'd love to hear them.

Finally, I want a Bluetooth head unit so that I can talk and play music off my phone. I'm looking at a Sony right now, but again, I'm open to suggestions of better products as long as the price range is similar.

Posted Nov 7, 2017, 8:53 PM UTC

26
cronsonGS810BH Focal165AS IX500.4 Zapco 1650XM II two XD1222AB sealed•

I would not go for Kicker for any of my mids and highs. There are too many other brands that are better, though many are more expensive. I'd skip the rears and put that money into the fronts, and I'd go for components instead of coaxials. Check out Morel, Focal, Polk, Infinity/JBL, Image Dynamics.

2
ckeeler11•

I would measure and see exactly how much space you have to work with. You might be better off getting 2 decent 10's over those 8's. I would not expect the RF's to have any near the output of the DC subs in the video.

2
DivisionMatrixOP•

There's not enough room to do 10s facing forward without lifting the seat, I'd have to face them down. You're correct that the subs I'm looking at aren't going to put out like the ones in the video, those are way nicer (and more expensive) than what I'm looking at. But I really like the look of the forward facing subs under the seat.

1
ckeeler11•

I just recommend maybe 10's since you seem to want more output. the 10's would do better down low. Make sure you have a solid set of grilles so the speakers don't get kicked in.

Also that retailer on Amazon is not an authorized dealer for RF so no warranty on the subs. If you are open to other suggestions Sundown E on closeout or Incriminator would be a really nice choice as well.

2
DivisionMatrixOP•

Those Sundown Es look pretty sweet, I might go with those. And I'll definitely have grilles. Thanks for the suggestions.

1
ckeeler11•

The Sundowns have more Xmax than the P2 and will take more than rated power if in a solid box. Which should will give you more output

1