Help with graphics settings

Currently GPU restricted in the warpgate and in small to mid fights, it turns to CPU restricted once there is a massive fight. Warpgate is around 100-110 FPS and small to mid fights 60-80fps. Massive fights go as low as 40 FPS.

GTX 1050 ti and i7 970.

Wondering what can I change to get more fps out of those small to mid fights.

[Display]

Mode=Fullscreen

FullscreenMode=Fullscreen

FullscreenRefresh=0

FullscreenWidth=1920

FullscreenHeight=1080

WindowedWidth=1024

WindowedHeight=768

Maximized=0

RenderQuality=1

[Rendering]

OverallQuality=-1

GraphicsQuality=1

TextureQuality=0

ShadowQuality=0

LightingQuality=1

EffectsQuality=1

TerrainQuality=2

FloraQuality=1

ModelQuality=2

RenderDistance=2000.000000

Gamma=0.430000

VerticalFOV=74

ParticleLOD=1

ParticleDistanceScale=0.650000

FogShadowsEnable=0

VSync=0

AO=0

MaximumFPS=250

UseLod0a=0

BloomEnabled=1

MotionBlur=0

Smoothing=0

EDIT: Ok looks like going full potato makes the FPS GPU bottlenecked at all times. So I'm not exactly sure what that tells me. Does it mean that the CPU stress is lower with lower graphics settings and so now the limiting factor is the GPU.

CPU use to be the bottle neck at all times with fairly low settings. Then I acidentally optimised graphics with the Geforce experience and then adjusted them back down and after that the bottleneck was GPU at most times but the massive fights. Now with full potato it's GPU bottlenecked at all times.

I was considering overclocking the CPU but I'm not sure that will do anything if the bottleneck is the GPU.

EDITEDIT: Ok went through this Nvidia tweak guide https://www.geforce.com/whats-new/guides/planetside-2-tweak-guide#16 and biggest factor was the models quality. Gonna see how that affects FPS.

Posted Nov 13, 2017, 12:54 PM UTC · edited

516
Iridar51Iridar.net•

Are you running more than 4 GB RAM?

A really weird combo of 2010 CPU with 2017 GPU though :P

You're already running basically potato settings. Aside from lowering Render Distance, there's not much you can do.

The good news is that with that Graphics Card you could actually raise some of the settings and get better visual quality at (nearly?) no performance cost. Try these settings, including Fog Shadows and Ambient Occlusion.

If you would like more hard numbers on what kind of FPS you're getting in what situations, here's a benchmarking guide for PS2.

Also - there seems to be a weird bug right now that causes enemy players to render even behind walls, which puts more load on your PC. Also known as "I get framerate drops whenever someone is shooting me".

3
[deleted]•

I bought the machine in early 2011 it had a GTX 580 but it bonked and I had to buy a new one, wasn't gaming at the time so I just bought the cheapest one. I'm super tempted to get a better CPU for planetside but I don't know because that is one fucking expensive CPU. Though I could maybe sell it.

Yeah lowered the render distance I'll see what I get with the potato settings and try the higher ones after that.

EDIT: yes 12Gb of DDr3 if I remember correctly.

1
Mr_That_Guy•

That CPU only goes for around $60-80 on ebay, and there are no substantialy better ones for socket 1366. You would be better off just building a new system or overclocking your CPU as much as possible. As with all MMOs, planetside also runs much better with higher clockspeed.

2
[deleted]•
1
[deleted]•

yeah this is why I was considering changing the processor. But according to that guy it won't fit my socket.

1
octicepsskill=k*(ragetells received)•

Changing to that Xeon would not be smart, it's just a lower clocked version of the i7 you have now with ECC support.

2
octicepsskill=k*(ragetells received)•

Unnecessary considering the OP already has a Gulftown. Only applies to people with Bloomfield chips.

1
[deleted]•

not really a tech guy, just thought it might help

1
CubeRaider[HZD][ZAPS][C10p]•

Well boyo first thing you can do is turn down that 2000 render distance. If you're primarily an infantry player, there's no reason to go above 500. Make sure shadows are off as well.

If you would like a competitive potato ini, shoot me a message and I'll send you one. It looks like this.

2
[deleted]•

Yeah I'm all about the taters nowadays. Use to run everything on ultra but now that I'm a better aimer anything below 80 you really feel in aiming. So please give me the taters.

1
CoachDwny•

Does anyone know the variable/setting that makes cloaked infiltrators and sundies easier to see?

1
octicepsskill=k*(ragetells received)•

Graphics Quality on medium or high

2
[deleted]•

[deleted]

1
octicepsskill=k*(ragetells received)•

I was considering overclocking the CPU but I'm not sure that will do anything if the bottleneck is the GPU.

Don't trust the in-game indicator, it's not accurate. The bottleneck is definitely the CPU if your setup is dropping frames in bigger fights at potato settings. This i7-970 has 6 cores but they're clocked relatively low (3.33 GHz) and Westmere's IPC is about 30% lower than Intel's current architecture, so overclocking will definitely help. This game doesn't take advantage of more than 4 cores and loves clock speed.

As for the settings, you got the general idea. Everything on the lowest except Graphics Quality on Medium (to see cloaked things better) and Texture Quality on Ultra. Render distance can be turned down to 500m if you only play infantry.

1
[deleted]•

Ok thanks. Will do overclock.

1
SynaptixBrainstorm•

You can turn your render distance down to like 200-300, IF you're only interested in infantry play. Otherwise, still turn it down to 500 while playing infantry and like 1.2k when doing vehicle stuff.

1
[deleted]•

VerticalFOV=74

god, poor child...

1