My AS-2259/GR antenna project (so far).
imgur.com/a/r2UvzPosted Nov 21, 2017, 11:49 PM UTC
Posted Nov 21, 2017, 11:49 PM UTC
Note that in a couple of the pics you can see one of my other antennas, a 200' long wire. This antenna is underneath it.
Good build, we've chatted about 2259s before. I think they are just great antennas if you understand their limitations and operating modes.
i'm messing with a goofy setup right now, not complete, but atop the 20 footer i'll have a short section of 1.25" meant to throw something like an Arrow J or Diamond X50 up. Gives you local/camp communication with the same pole
Yeah, they do have some limitations, which is why I'm looking at making some modifications to allow it to also be used as a vertical if desired (something you couldn't do with a real one). I figure that for a 20 meter vertical you could use 8 radials about .125 wavelength long.
Also, the mast could be used to support a VHF/UHF antenna, and could easily do so while simultaneously being used as an NVIS antenna on low HF: the two separate antennas wouldn't interfere with each other's operation.
OK, so I decided to build myself an AS-2259/GR-style antenna. Today, I got the main build done, and made a couple of contacts with it on 40 meters. I tried on 75 meters, but it was still early and the band seemed quiet. I didn't stay out because the sun was setting and it was getting cold. I switched to 80 CW and did get spotted by W8WTS in Ohio, about 400 miles away from my QTH.
The mast is four 4' sections of PVC 1.5" PVC pipe, and the legs are cut for 40 meters and 60 meters (ish). The base is an old patio umbrella stand that I told the XYL she couldn't throw away. The insulators are 2" sections of 1" PVC pipe, drilled with 1/4" holes for the guy lines, and smaller ones (can't remember how small) to fit a 6-32 bolt and nut to hold the antenna elements which have loops soldered into their distal ends. The proximal ends have lugs soldered to them. The top cap of the mast has 6-32 bolts through it, that hold the ends of the antenna and also the feed line, which is a random piece of RG-58 I had laying around.
But I don't plan on stopping: I figure that it's probably a good idea to make it also capable of DX communication, so I'm going to add a few bolts at the bottom so that it can be configured as a vertical antenna, with a single element running up the mast, and a strap running around at the bottom to which you can attach radials. You'd have to have to guy the mast, but that's OK, easy enough to do. Use all 4 sections for 20 meters, just 3 sections of mast for 15 meters, and 2 sections for 10 meters.
The other thing I'm considering is making a different cap for it that will turn it, with appropriate elements, into a 20 meter and up HF Discone antenna.