Messed up while picking a Masterlock M40XKAD, not the plug won’t rotate. What did I do wrong?

Advice

It’s been ages since I got any practice in locksmithing/picking, so the other day I bought up a few padlocks to keep my skills sharp.

But after successfully picking a Masterlock M40XKAD, I realized that I had done something wrong. The doesn’t roate the way it should- it’s stuck at a 120° angle. I feel like the solution is probably painfully obvious, but it escapes me anyways.

Here’s the position that the plug is stuck it. There’s a little bit of give, but not much. I can provide more pics if need be.

Posted Jan 21, 2018, 9:08 PM UTC

36
M_RayPurple Belt Picker•

This happened to mine as well, never found the actual cause but I had picked it a ton and mostly gave it to new ppl for practice. Ended up cutting it in half to see what was inside. I know this doesn't help but you're not alone in getting one of those stuck.

2
supallamaBlack Belt Picker•

Thats an odd place for the plug to stick... have you tried percussive maintenance?

1
yuloforceOP•

I’m hesitant to be too rough with it just on the off chance I damage it even further. Although I guess I could use a plastic/rubber mallet instead?

1
supallamaBlack Belt Picker•

yep a rubber mallet should work, basically turn the plug closed with a tension wrench and hit it with a rubber mallet, that might knock pins loose. No clue why its locked in that position though... I expected a 180 or something...

1
Frosty901_Red Belt Picker•

At that position I’d almost say that the shackle is stuck, not the core. With these particular locks the two do not operate independently of one another. I’d follow supallama’s advice and live it a good knock while under tension buddy. 👍

1
yuloforceOP•

The shackle has been loose, tho. It doesn’t latch into place, but it freely moves back and forth.

1