Figuring out proprietary pinout on an LCD driver

Hey everyone here, I wanted to finally get into PC modding, after seeing one of those awesome LCD side panels, but I've run into a bit of a snag at the moment and wanted to ask for tips from the people here.

I'm working with an old 19" 5:4 LCD Monitor I got off ebay and I'm currently trying to figure out the pinout on the PSU connector to the driver. There aren't any visible specs on anything, but I thought maybe someone here has a better understanding of PCB components etc. and can help me figure this out.

Here are pictures of the cable connections, as well as front and back views of the PSU and driver PCBs.

I also have this, my current guesses for the pinout based on the traces and components (warning: my tablet wasn't working, mouse drawing/writing).

I can obviously provide part numbers etc if that helps. The two PWM wires I labeled go to this guy, among other things (too many connections to trace completely).

Posted Jan 29, 2018, 4:14 PM UTC

33
ICanLiftACarUp•

Any idea what the parts came out of?

Also be careful with the PWM inputs, I'm not sure how you usually drive these things but the PWM signals won't be coming from your PSU, those are usually just meant for data.

1
GenerousGuavaOP•

The PCBs are out of an AOC LM929 LCD Monitor. What do you mean they're for data? I don't really understand how the internals of PSUs work, but what kind of data would that be? Maybe for the LED backlight control? I know the connectors for that are directly mounted on the PSU rather than the driver. If those 3 extra signals are only for LED control I wouldn't need them since I'll have to remove them anyways.

I should also mention, the pins labeled GND1 and GND2 and 5/12V 1 and 2 are each connected on the driver board (and the PSU board in the case of GND 1 and 2), so it's clearly for splitting current over those low gauge wires. The 3 extra aren't connected so it's obvious no significant current will go through those. I just don't know if they're needed.

1
iamtoe•

the data is just controlling the backlights. you wont need them if you aren't using the backlights.

1