TMOTW #18 "r/tevotarantula" CR-10 Tevo Tarantula 3 Wheel Guide System

https://www.thingiverse.com/thing:2784994

Disclaimer: This has not been tested, no baby rage please :) If there is a problem, I will correct it.

I made this solely for the community. I have my own design I use. I figured we don't have enough 3 wheel designs so why not just grab one of the most popular ones and bring it over so the tarantula community can use it. I will not be printing it unless there is a problem. Should I have missed something silly just let me know and ill correct it just don't bitch about it because you were warned. I think I got everything covered though. #fingerscrossed :) Unfortunately due to the design of the CR-10 guides, all the vertical carriages i have seen can not be used with this setup. But if someone wants to make one that will, and modify this guide for a little clearance that would be awesome.

Setup is the same as a CR-10, so be sure you have the necessary hardware and refer to that setup before proceeding. Also you will need an idler assembly like below or one with suitable clearance. I have included an adjustable z motor mount to help with z screw alignment and you may not need it. I can't remember if the original is like this or not, but it was what I built it around. I dont know the source of that part.

https://www.thingiverse.com/thing:1580899

If someone wants to make a bottom motor mount to align with this that would be cool :)

Edit: Just noting, i was up late and meant to move the x in the correct position for the picture and did not. Should work as cr-10 setup style