LED protection and info needed

Last year I decked my bike out with a lot of 5050 LED lights, they looked awesome. I had a problem with the strings getting broken a lot as my bike is a long tail cargo bike and I rode lots of people on it, leds took a beating at times and would get ripped or torn. Is there any good way to protect them, like some kind of clear flex tubing I could easily put a 505o string into.

Also anyone know of a good resource for learning more about leds and customizing them?

Posted Apr 20, 2018, 7:52 AM UTC

77
Mayor_Bankshot•

I assume those are the flat LED strips? You can go to the hardware store and buy whatever diameter clear hose you need and thread the LED through. You probably want to go a bit wider as it'll be harder to thread the longer the strip is.

I did this last year but with fairy lights which are just single stand copper lines. I used some old beverage tube I had sitting around and it worked perfectly.

5
nemoskull•

you'll need to upgrade to 3mm leds and real wire. not magnet wire, actual real wire. old parallel printer cables are great for this, especially the belkin cables. i usualy wirewrap leds and resistors with an old radioshack wire wrapping tool, no soldering needed.

3
wolvie604'15 to ∞•

Assuming the strips are wrapped around the frame? I use clear gorilla tape and wrapped all the lighting with a few layers. It's not completely transparent like packing tape, but it's barely noticeable, especially at night.

3
variable_undefined•

adafruit and sparkfun have all the info you seek and more

2
seethinksay•

Seach LED strip track and dome/cover

1
Jazicle'12 '13 '14 '17•

Search on Aliexpress for "IP67 LED module" and you will get a variety of shapes that are very dust and crush resistant.

I've also heard that clear PVC pipe exists but never seen it myself yet.

1