Water pressure both too high and too low
Here's a mystery, at least to this layman:
I have very low water pressure in the kitchen and both bathrooms (sink and shower/tub). While trying to figure it out, I put a gauge on a washing machine fitting and that one reads 130PSI (!)
The washing machine fitting is definitely downstream of the pressure reduction valve. I'm on city water, and this isn't fluctuating - multiple readings over multiple days, and the low pressure in the kitchen and bathrooms is likewise constant.
How on earth is this even possible? If I get a pro in to figure out the high-pressure problem (likely a bad PRV), is the low pressure in the rest of the house going to get even worse?
Posted May 9, 2018, 11:29 PM UTC
Sometimes when your prv goes bad it can have high static pressure but when a faucet is turned on it will drop pressure significantly. Hook your gauge up again and then go open a faucet and see if pressure drops
Thanks for the tip, great thing to check! The gauge on that dishwasher fitting drops from 130 to 124 when I open the kitchen tap, so might not be that.
However - I am maybe overthinking things here. I know I need to replace the PRV; I'll just have to follow where things lead me after that I suppose :)