The Baby Meatray
Posted May 18, 2018, 4:02 AM UTC
Posted May 18, 2018, 4:02 AM UTC
Well that's fucking terrifying
Thankya!
ya know all i read was you integrated babyback ribs into a nerf gun, and i loved it
I want my babyback babyback babyback
I love it
Thanks a bunch! You should make one dude
I definitely feel inspired. Might try something similar on a khaos
Dakka for days! I need to get my hands on a khaos for the lols. Plus I would like to make one backpack fed like The Captain did for his minigun. Hirracaine on steroids.
Take your updoot, I gotta get out of here
Thank ya, gotta be spoopy
How did you get the wood-like look to the grip?
I'm looking to do something pretty much exactly like that with a project. I thought about doing a Hydrodip for a specific part just for that wood grain, but the parts are so small I don't really want to go that route if I don't have to.
Its actually (relatively) simple.
First you'll need: Flat black spray paint Some white or off white latex paint And some rattle can stain (I used Minwax polyurethane Pecan, Oak, and Bombay Mahogany)
First apply your black and let it cure, then apply a dry brushing coat with the latex. The brush needs to be just about dry because you want many thin streaks and little to no blobs. Have a piece of cardboard to dry it on and practice.
Once you have streaks on the gun apply some of the lighter stains, dont worry about getting it really dark because you will be repeating the dry brushing and staining many times over the peice, and with each pass your old grain gets darker and newer grain appears. After you have it like you want you can apply the darker stain to accent. Also for even more depth if you want a dark finish, use some of the flat black and just barely mist it over the edges.
I reccomend having a fan to blow air over the pieces between coats because the polyurethane will stay tacky a long time even with thin coats and that helps speed up the process.
This method I learned from Hypercats Network on youtube. Search him up with the word woodgrain and you should find his tutorial, he used a different stain/toner product that not only dried faster but also seemed to have a deeper color. I used minwax just out of availability. Its in most big box home improvement stores.
Thanks, helps alot, hopefully I can get it down to where it looks as good as what you did. I'll definitely experiment with it first before I go all out and do it.
Best of luck! Its really a simple method, it is just very time consuming with how long the curing takes. Pretty soon Im going to get my hands on some Mohawk Spray Toner, which is hard to find but yields better results.
Same to you, and I haven't heard of that, I'll look into it
Great song choice. Love Aesop.
Heck yes. Even his instrumentals are absolutely ballin. You ever listen to his mixtape "The Blob?" It has a whole heaping lot of instrumentals he never used, and one of then ended up being used on Bar Breaker by Prof of Rhymesayers lol.
Shit the day someone finally knew more about Aes than I did lol. Didn't even know about that, checking it now. But yeah, really glad he started to do his own production after Skelethon. Really tight beats for sure!
There is one drop after the bar breaker instrumental on The Blob that goes, "Out of the ground, into the sky, out of the sky, into the dirt," that is absolutely banging. I think around 4:30 of the youtube version.
Wow, just wow...
I have to build me something like this and terrify the shit out of everyone at our next war :D
Any infos on the build process?
Well, basically this blaster began as a 3s Mosfet build for a war and after its second use I lost a thumbscrew I had made and burnt a mosfet at home.
I found some bonding putty in the plumbing section of lowes and figured I would give it a try.
Any bodywork was done with the putty because it sets extremely hard and I started with the spine on the plate, then the flesh growing out of them.
From there I went and got a baby doll head and applied some Vinyl Upholstry paint from an automotive store and used some oil/watercolor/acrylic on the eyes.
From there I sculpted the fangs out of that cheap polymer clay you can get at walmart for like 97c and gorilla glued them on each side. Same for the teeth, they are the softer clay so if I run into anyone by accident they will snap and not stab like the epoxy putty will.
After that I got the internals reinserted and replaced the mosfet and did some tweaking so the wires would not get pinched by the opening I made for them near the battery tray. The jam door was also removed so I could still access the inside, though I have never had a jam with this particular blaster.
From there I sort of just took time painting the fangs, skin, and flesh on the blaster and once I had the color I liked I clear coated everything that was biological heavily, so that it would appear wet. Once finished, I began to set the head in place with various tendons and muscle made of bonding putty. This was one of the trickier parts because this stuff is only pliable and sticky for a short time and once it sets it becomes incredibly hard, plus you should use gloves for it because it is basically a plumbing adhesive. I started with the larger chunks of meat first, and then did the bone on the back of the head that wraps around the jam door. After that set, I painted with various mixed paint colors and types, and applied clear coat while still wet. This blended the colors and actually made new ones like a nasty shade of orange that dripped down the parts giving a quite gross texture. I then applied the thinner tendons on the jaw and finished accenting the bone on the back of the head, repeated the paint and clear and thats where it is at right now.
Its a bit long winded but if you have any questions about any particular part Id be more than happy to help.
Nice! Reminds me of the Amalgam (which is a good thing) but clearly also doing its own thing (which is also a good thing!) Amazing blaster all-round.
Though I gotta ask: what (if any) internal mods?
That thing is friggin gooey! I like the texturing he did on that. My biggest challenge on this project was the painting honestly, im happy with how certain areas came out nearly identical to the in game design, but other areas need work on texture and color tone.
Internally this thing runs off of a 3s lipo, with a mosfet switch. So basically it has a nice clean button and trigger pull but, without a jam door, is quite loud. I could have made it a burst but Ive already fiddled with the trigger a bunch and it is just as easy to touble tap and save ammo.
On a chrono this blaster peaks around 120 fps which is kinda underwhelming but great because I can run it in most any competition, so long as they dont mind the appearance.
Insert every comment on deadpools face
So based off of the first movie's lore. If he loses his head like entirely, will his head grow back like a baby's or will a new body grow from the head?
Also what if his head is completely obliterated?
Have any firing footage?
I will record a vid when I get home!
[deleted]
Here ya go! It is spliced up from phone footage cause I dont really have any recording equipment set up.
(Edit: forgot link)
Oh awesome!
Thank ye!
What kind of upgrades to you male to the internals?
Stock flywheels and rev switch. It has a 3s lipo hooked up and a mosfet to the switch. The grip fed mag guns dont have a lot of room to play around with unless you want it janky.
Oh man, I love this. Super creative. I hope you plan to make more stuff like this in the future.
Thanks a bunch! I may not go this grizzly in the future so I don't upset all the parents at events lol, but Im definitely going to do more bodywork now that I found a good product and method.
This is AWESOME. The runes are crisp, the metal looks hard, the wood looks soft, and the baby looks gooey. The overall effect is terrifying. Some high quality body horror here. I'm especially impressed by the spine and lower jaw constructs. Magnificent work.
Thanks a boatload man. This particular build took quite a bit of work but I am proud of the results. Sadly someday this will get redesigned because it is my only Hera. But I am definitely putting this through as many wars as I can until then!
[deleted]
Firing Demo (I added a bit of a downrange shot)
"I should warn you that I've filled your suitcase with orphan meat. I'm making a meat gun, and not just any meat will do"
Lol what is this quote from?
Go look up a short youtube series called "Llamas With Hats".
This particular exchange happens in ep 3.
Ah! Filmcow. I havent watched his stuff in ages. Caaaarrll.
Professor Toothy though will always be my fav.