HOPE restoration device experience

Device Advice

I was recently alerted to a device called HOPE by u/angst1991, so I purchased one. it can function as both a tugger and a direct air device.

Here is the ebay link.

The maker has some info about sizing and a video on youtube describing the device. I like that the inner and outer cone are one single piece of silicone, and that it incorporates a built-in one way valve, inflated by a basketball inflation needle, so it's very compact.

I followed the sizing information carefully, and the thing gripped well when I received it and put it on. It seems to grip well enough for tugging. But I was interested in the inflation aspect, and unfortunately, as soon as I added even a little bit of air, it immediately let go. The gap between inner and outer cones is too wide. I suppose different men have different thicknesses of skin. There are no returns (understandably), so I'm afraid I'll have to eat the cost.

It might be a very useful and compact device for someone whose foreskin is thicker, or who just wants to use it as a tugger. I may not be correct as to why it doesn't work for me. Just thought I'd share my experience.

The Hyperrestore DA I got a couple of months ago works better, because I can adjust the spacing between inner and outer cones. Although it is not something I can wear discretely, so I use it a few times a week, and focus mostly on MM3.

Posted Jul 22, 2018, 1:56 AM UTC

912

I have two. Both are total shit and were a complete waste of $$.

6
okgeekhere•

Hey, that eBay link says that the item is no longer available.... Got a link that works? I'm really interested in this.

3
resensingOPRestoring | CI-3•

Here is the tumblr page with all the info.

2
okgeekhere•

Thanks!

1
CaboKev•

I ordered a Hope restorer and I’m waiting for it to arrive. I have given up on the Hyperestore because it slips off with any amount of pressure, This is in spite of keeping everything clean etc. Etc. I hope the Hope restorer holds air better.

2
resensingOPRestoring | CI-3•

Hope so. As I said, mine didn't hold air at all.

Did you adjust how far the inner cone slides into the outer cone on the Hyperrestore? That worked for me.

1
CaboKev•

Yes, of course, I’m well aware of the the importance of the location of the inner cone with respect to the outer cone. The hyperestore seemed to grip quite well when it was new but grip has gone downhill in the 18 months I have had it. The colour has also changed to quite yellowish, it was white when new.

2
resensingOPRestoring | CI-3•

That bothers me. I learned recently that pure silicone is transparent. So the Hyperrestore definitely uses silicone with some unknown additives.

1
CaboKev•

I received my HOPE device yesterday. Not impressed.
I makes a good tugger for strap tugging but will not hold air past the most minimal pressure. It will immediately let go under low air pressure. Very disappointing. I bought the HOPE device because I was less than happy with the gripping capacity of Hyperestore. The gap between the inner and outer cones is way too big, hence the easy slippage. HOPE is really just a tugger and not an inflation device, I spite of the advertising.

Now I’m back to using my DTR retainer with the air hose adapter as an inflation device. Air leakage was a problem but I made some modifications and now leakage is not a problem. I also made some modifications and slippage is no longer an issue either. I added a condom catheter directly onto the nylon bell. Skin goes directly on that and for a gripper I use two of the DTR silicon grippers. So far DTR Air is the best, and cheapest air inflation device.

HOPE also comes with a small handful of very long and very thin orange elastic bands. Not sure what they are for as they are way too weak to provide any meaningful tension.

2
resensingOPRestoring | CI-3•

Yeah, it seems it was designed for someone with fairly thick skin. Too bad, it's a pretty cool concept, but needs work.

2
angst1991Restoring | CI-3•

Hey man! Sorry the HOPE didn’t work for you. I’ve had some issues with it coming off with inflation as well, but only at higher tensions.

I’m trying to avoid high tension (I’ve had many injuries) so it hasn’t been an issue for me. I do find that it holds well as a tugger. My apologies for not mentioning the higher tension issue.

1
resensingOPRestoring | CI-3•

No worries at all. If you had mentioned it, I still may have bought the device. But for me, it doesn't even hold at very low air pressure--barely enough to feel any stretch and it slides off. I think the maker has some work to do to make this thing usable by everyone. Glad it's been working for you though!

2