Laying across multiple burners?

Hey all,

This is probably a stupid question but I'll ask it anyway just to be safe. Just got a massive PC 23 qrt and I want to use it on my tiny apartment gas range stove. The stove is in the corner of a room (pretty tight fit) and the pot doesn't fit center on any burner. Is it okay if I have the pot heat across multiple burners? Thanks

Posted Aug 15, 2018, 3:49 AM UTC

245
vapeducator•

You have to be very careful about how the hot air flows around the pot because you could excessively heat the sides of the pan and the handles, causing the gasket and handles to be damaged. Base of most pressure cookers is usually very thick and is designed to evenly distribute the heat that travels across the surface, but if the flame bypasses the thick base then it can flow over the thinner sides and unprotected handle bits. You might consider alternate methods of getting a larger pressure cooker up to temp, such as using an inductive burner, using multiple pots on their own burners just to heat up water to boiling to add to the larger pot, or using an outside turkey fryer base (with the same caution about letting too much heat bypass the base).

10
YourFairyGodmother•

Bingo. And FYI, OP, induction hobs can be had relatively cheap. BUT, they don't work with aluminum pots. If you can stick a magnet to your pot, you're good to go. If this is your case, I highly recommend you get an induction hob. Besides, they don't take up much space, are very energy efficient, heat the cookware very very quickly, and dont heat up the kitchen.

2
Lolor-arros•

As long as there's water in the pot, yeah, that should be fine.

You can also use one burner off-center, but it will heat things up a little slower. Maybe bring it up to pressure on multiple burners, then reduce it to 1 to cook; it takes a lot less heat to keep things going than it does to start the process.

It doesn't have to be centered

1
AofwaOP•

Thanks!

2
huntt252•

Yes that would be fine. Probably work great !

0