Print Shifts Constantly
I've been trying out the new Ender3 I got and every print I make has been shifting over to the left randomly, damaging to outright ruining prints. I tried looking around Google, but I haven't gotten any definitive answers since I don't even know exactly what's causing this anyways. Putting down a picture along with the post if anyone can help me along?
Posted Aug 18, 2018, 11:38 PM UTC
37
It is always in one direction, so it is an issue with the controller or the motor for that axis. Here are the things to check:
I'll be running a test print right now to check. Another first thing I forgot to mention is that the nozzle seems to collide with the filament that got placed down too. I often hear scratches/crunches and that's what incidentally made me catch this so early this time.
Update: The stepper motor is indeed getting hot.
Is it any warmer than the other ones? It is not unusual for them to get slightly warm.
Not too much? They're definitely warm, but only as warm as the bed itself (60F). Also, for some reason, the test print (A wall tile off Dragonlock) is now 33m in (out of 3h) and has absolutely no shifts anymore. Shifts normally occurred before the tend minute mark at the earliest and 20 at the latest. I have no idea what fixed it.
The only different thing I did was home it first and tried to tug the Z-Axis belt a bit more.
I still hear occasional cracks and scratches though, so no guarantee that it'll be perfect just yet.
You could also try slowing the print down by 50%, that may help.