I'm looking to use a AIO for my next build, but I have invested in 5s batteries already for my current build. Any personal experience with 5s AIO?
Posted Aug 25, 2018, 11:12 PM UTC
you want a true all in one? Only ones out there are the lumenier/racerstar ones and those are kinda iffy. Better off getting a good FC and 4in1 esc stack. Matek and Airbot(and all of the rebrands) have good stuff.
If you want to shave weight/size The airbot omnibus nano v5/6 is 20x20 and 6s capable and the airbot ori32 is 20x20 25a 4in1 that many people run on 6s. Ive flown my 3in with the ori32 on 62 no problems
Only ones out there are the lumenier/racerstar ones and those are kinda iffy.
If you mean the Lumenier Alpha/Racerstar Tattoo F4S then those are both actually the same rebranded Sunrise Siskin board (eg the company that makes the Cicada ESCs) & everybody that I know who runs them (I run two myself) has found them solid. Not the easiest board to solder & I wouldn't recommend it for amp heavy motors (my two have 2207 & 2306) though.
My asgards have stood up great to high kv, heavy props and big motors for over a year now. I have run them on 5s, but not extensively. If you have the skills to reflow smd components, the only part that needs replacing is the filter cap bank, which are not rated to high enough voltage - everything else is fine with the extra volts
I dunno.. my DAL Engine stack runs 5s. I'm not sure how "All in one" you're trying to get.
EMAX makes an all in one stack. The EMAX MINI MAGNUM 2 6S - 20X20 V2 .. .The V2 version goes to 6S
It's fairly small.
I use the HobbyWing stack for my 5s build. It’s not the new 32-bit version but it works nice.