Please help me find a set of high sensitivity car speakers
- What are your goals for your car audio system - as loud as possible (SPL)? Sound quality (SQ)? Some combination of both? Describe to us how you want your system to sound.
better sound then stock speakers - louder is not the goal / less distortion is
- What vehicle? - year, make, model, type (coupe, sedan, SUV, truck, etc.)
mercedes clk coupe (w209 with no sound system - no bose or harman l7 - all usa cars had a sound system / offboard amp but this is not a usa car) car has MOST not d2b
- What is your maximum budget?
$500 usd
- Will you be installing the gear or are you going to a shop? If a shop is doing the work, does your budget include the cost of labor?
shop, labor is budgeted seperately
- What gear is in your existing system? (Is it stock? List any aftermarket gear.)
stock
- What is your country of purchase? Leave any finishing thoughts here.
canada or usa (car is canada spec - but i can order or buy from the usa - both canada and usa address)
car is a mercedes clk (w209 with most not d2b) not from USA (all usa cars were harman L7 or bose) base level stereo (no "sound system")
id prefer a true 6.5 (crutchfield 6.5 sizing) component set in the front and a 5.25 coaxial in the rear but larger sizes can be accommodated in both positions (a 7 can be accommodated in the front with modified mounting and a 6.75 in the rear with modified mounting)
id like another option besides the morel maximus 602 in door forward mount and polk mm522 in the door rear mount (its a coupe - all speakers are in the door)
i also feel like its a waste to put a JL c3 (convertible) set in all positions
the car has no subwoofer
its ok if the included front tweeter does not fit in the stock location - i found a Focal tweeter that fits the bill
as the plan is to use the stock radio which may only put out 8w per channel before distortion so id like approximately 94db per 2.83v/m or 90db 1w/m or better
oh and so the stock radio (amp is on board) doesn't blow up the speakers cannot be much lower then 4 ohm (3.5 ohm is fine but none of this true 4ohm but really 2 ohm bs)
Posted Sep 18, 2018, 3:38 AM UTC · edited
Unless you’re distortion is being caused by damaged factory speakers all aftermarkets speakers are going to do is change the frequency response, potentially loose bass, and overall output volume. Distortion in a stock vehicle is typically caused by a lack of power causing you to drive the factory amplifier beyond what it is capable of.
That said checking in with the shop you’re going to have perform the work would be wise to see what they recommend and to see how what they have available and how they handle outside product. Some shops won’t install gear not purchased from them or they charge more for it, or they warranty the labor performed differently.
i want higher then stock sensitivity speakers for this reason. 6db (i wrote 3db before) better then stock is like doubling amp power.
that should fix the amp distortion issue AND stop the tweeters from blowing due to square waves
anything i write will identify the shop but after they admitted to lying about being authorized retailers for some stuff i have Carte Blanche to bring in whatever i want.
they backdoor something like half the brands they sell and the reps look the other way
as they have a bad habit of drilling doors this install will be using stock wiring and otherwise their installs are typically well done
i don't expect a warrantee
That’s not accurate. +3db is the minimum increase in volume perceptible to humans +10db is the perceived doubling in output volume or twice as loud. A sensitive speaker isn’t going to prevent overdriving the factory amp.
Factory speakers tend to be incredibly sensitive where aftermarkets aren’t and tend to rely on amplification to make up for that fact. That said crutchfields .com and .ca allows you to sort by sensitivity.
As for the shop, I’d be looking elsewhere if they’ve admitted to lying and are known for subpar work.
i really dont want to single out the shop but they are not known for subpar work. the only thing they do wrong is drilling doors.
they were bragging to me about selling more of a certain brand then many authorized shops. this was not a lie.
+6db is the equiv of doubling apparent amp power i was mistaken
even when the amp is not distorting the speakers sound like rubbish. basically they sound bad over 5w of power
i really cannot go any further on this as it could come back to the shop and open a big can of worms
And
All red flags but it’s your car and your money.
Again no, a doubling in power gets you a increase of +3db. So it would take more than double the power to be twice as loud.
I’m not saying don’t change your speakers, I’m just saying temper your expectations. A speaker with a high sensitivity may help a bit but it’s not going to change everything.
im looking for options not on crutchfields' sites. not polk, jl, alpine, jbl, infinity, kicker, pioneer,
in my initial post i mentioned 2 options for both the front and back, perhaps somone knows about something else.