2001 Yamaha R1, loud clacking noise in first gear

Solved

Trying to pin point the source of the noise, it seems to only occur in first gear and I can feel the impact somewhere near my left foot.

My first instinct was a buggered chain and sprockets, new ones are on their way but I'm not convinced that will fix it as it only occurs in first gear regardless of the speed. Tried running it on a paddock stand but the unloaded chain produces too much noise, can't find the original sound.

My other thought was maybe worn clutch plates but I'm not sure.

Open to any and all suggestions and thanks in advance for the help!

Posted Oct 1, 2018, 3:14 PM UTC

1117
seacappy•

How is the chain tension?

3
scorpionMaster•

How's the chain lube?

3
MaybeNotHeteroOP'01 R1 // VFR 800 Streetfighter•

Tension is right in the middle of factory spec and it's just been cleaned and lubed

3
shakefu•

Does it vary with RPM or speed? You say it’s loud but not louder than the bike chain on a stand?

Video would be super helpful.

You mention pillion in another comment - just use a camera phone, start recording, place in your pocket, drive down your driveway and film with left hand, put back in pocket, and cut the start and end.

Clacking with speed could be chain or bearings. Clacking with RPM could be valves or cam chain. Steady clacking could be a loose part.

Clacking is a wide open term.

Help us help you.

My random guess is loose sprocket cover or chain guide.

3
MaybeNotHeteroOP'01 R1 // VFR 800 Streetfighter•

Does it vary with RPM or speed? You say it’s loud but not louder than the bike chain on a stand?

It only occurs at low speed, at higher speeds it is not noticeable. When running on the stand the chain tends to jump. Due to this I'm hoping it's just a worn link and front sprocket. New chain and sprockets going on tomorrow so we'll see.

Fairly sure it's not valves or cam chain as I'm familiar with those noises.

My random guess is loose sprocket cover or chain guide

Definitely not these, I removed the sprocket cover to check if there was anything stuck in there. Scraped out 18yrs worth of road grime as well, fun times haha

1
shakefu•

I’d like to revise my guess to needs new sprockets and chain.

2
redruM69•

Can you record a video?

1
MaybeNotHeteroOP'01 R1 // VFR 800 Streetfighter•

I'll give it a shot, might need to find a willing pillion haha

1
kartious•

Could record it on the stand at least if that's easier

1
DixieN0rmusHonda(Red Level) YamaPro Suzuki(Silver Level) KTM/Husqvarna•

Would imagine it seems to be related to the chain

1
SamaMaBich•

Is your chain slider worn? Part #27

1
MaybeNotHeteroOP'01 R1 // VFR 800 Streetfighter•

Didn't notice anything amiss when I checked the front sprocket But I'll have another look when I change the chain, thanks!

1
SamaMaBich•

There should be a piece of rubber between the chain and swingarm that prevents the chain from contacting the swingarm near the front sprocket. If that's worn or missing the chain will be hitting the swingarm and making the loud noise.

2
MaybeNotHeteroOP'01 R1 // VFR 800 Streetfighter•

Whacked the new chain and sprockets on and the issue is resolved, bike is much smoother now.

Unfortunately that smoothness has allowed me to feel a knock in the front end somewhere I couldn't before, probably a buggered steering head bearing.

Thanks for all the help fellas, it was the simple solution in the end :)

1
foxtrottits•

Hey, I think I might be having the same issue. I've got a bit of a grinding sound coming from the same spot only while I'm in gear and accelerating. I can hear it in 1st, 2nd, and 3rd gear but it's either drowned out by noise or just goes away in 4th. It's very sporadic (no cadence or rhythm to it) and sometimes I don't hear it at all. Does that sound like the same thing? I've suspected I need to change the sprocket.

1
MaybeNotHeteroOP'01 R1 // VFR 800 Streetfighter•

Could be, probably worth doing just to rule it out since it's cheap. I'm about to check the valves and cam chain on my R1 so I'll report back to you if anything there is amiss

2
foxtrottits•

Thanks for the response, good luck on your fixes.

1