r/Vaping•
our_type

Alien 220/0.12 coil

hi r/vaping

I've been building coils on a kylin/alien combo for about nine months. Today I picked up some prebuilt coils as local shop had run out of wire. these are obviously drastically better than my efforts because a dual coil build came in at 0.12 whereas mine are around the 0.3 mark.

I'm vaguely worried that it is pretty low. is there a max wattage I should be putting through this?

Posted Oct 3, 2018, 8:55 PM UTC

15
V6A6P6E•

Just go by your taste. I would start at 75w and go up or down from there. Everyone is different.

1
our_typeOP•

perhaps I didn't word this right but I'm more concerned about safety here - I like to vape around 80w but I'm unsure if there is a safe limit

1
V6A6P6E•

Not with a regulated device. Some devices limit voltage but in my case I’ve never had a .1 ohm coil have issues on a regulated device. Now, it does tend to drain the batteries faster and pretty noticeably when using three or less batteries. If you are referring to the unregulated pulse mod then it’s up to your batteries and you for safety.

2
laxdrummer18•

You're good. The lower resistance actually means you can put more wattage through them. I'd run a similar build at like 100W

2
our_typeOP•

thanks

1