My battery charger isn't seeing cell 2, I've tried multiple batteries.

Question

My charger is a hobby king x120dc it was working fine yesterday and now its not seeing cell 2 on any battery. It reads cell 3 as being over 6v.

Any help would be much appreciated.

Posted Oct 26, 2018, 6:36 AM UTC

24
ghlargh•

Does it do this on both 3S and 4S batteries?

Can you look in the other balance connectors and see if there is a piece if metal stuck in there or if any pins are bent so they short to each other?

2
nutterz13OP•

Yes, I noticed it when I was wanting to charge my 3a taranis lipo. I checked it with a 4s battery and the parallel board which uses the 6s connector. All gave me the same results.

1
ghlargh•

Unless there is a short in one of the ports that really sounds like an internal error, it might not be easy to fix.

I personally would be wary of trusting a charger that could suddenly give the wrong voltage reading.

2
nutterz13OP•

Thanks, I thought it could be potentially a software thing.

I’ll just chuck it out.

1