Sony XBR65X900C LED bad LED board?
I recently received a 65" 900C (i got it for free), and when it powers on, a relay in the power supply clicks, the TV boots up, and at some point while using it the TV will click off and flash 4 red lights on the status light.
Before the status light flashes, there is a sporadic powering off of the edge lit LED lights, a relay then clicks on the power board and the TV powers down and the red lights flash.
Its sporadic on when it happens, it could be immediately or it could be 20-30 minutes into being powered up.
Is this the LED control board? Or could it be the main Power board that could be having issues?
Posted Nov 22, 2018, 6:30 AM UTC
11
4 blinks with this TV is the LED's themselves. Which are next to impossible to find. Chances are the LED's are fine. But the used shit solder when they made those and the LED's move off the pad because of the heat. And I swear, this TV only needs one LED to go bad and the TV will throw the code. And the TV has about 150 LED's. Give or take.