r/ecobee•
Fant2

Automatically switching to auto!

Problem

I have two ecobees in my house both set to heat mode. Twice now one of them and switched itself to auto and as a result the A/C has turned on. I switched it back to heat mode but does anyone know if this can happen by itself?

Posted Dec 9, 2018, 1:15 AM UTC

21
ViennaBACON•

I have a support ticket open with ecobee regarding my first-generation ecobee3 which seems to be responding to "phantom" touch screen inputs despite no one touching it. This has manifested itself as manual holds canceling themselves before they're supposed to, and if I open a menu I don't have to wait long to see it move by itself. I suspect the holds being canceled is less likely to happen since it's such a narrow horizontal sliver of the screen that needs to be "touched" in order for that to happen, although last weekend it did it twice within 10 minutes!

If you've got the same problem I do it still seems like it'd be incredibly unlikely it would register the two consecutive "taps" necessary to switch to Auto mode, but...who knows? My workaround for the time being has been to enable Access Control; now I've been coming across the thermostat sitting at the code input screen, but at least it's not able to "override" my holds. Maybe give that a try and see if it stops changing the mode on you.

1
OnlySlightlyFamous•

Hey, I know this is an older post but I'm having this issue recently on my ecobee 3 and this may be the only post I've found regarding the issue.

Did you even hear back from Ecobee about the cause or a fix for the issue?

1
ViennaBACON•

Ah, I had been meaning to write a post with my experience of this...

They asked me to send them a video showing the problem and, after doing so, they told me it's a hardware problem and, being out of warranty, I'm out of luck. Not what I wanted to hear.

I'm not sure if this is the same problem or not, but I've had a few occasions where the screen wouldn't respond to input at all. A couple times it resolved itself after a few hours, but on another the screen wouldn't respond or go into standby mode for 24 hours. I ended up cutting power to the furnace to reboot the thermostat and then it was working again.

1
OnlySlightlyFamous•

Hey u/fant2 did you ever find a cause or solution to this issue? It's happening to my ecobee 3 now and this is one of the only posts I can find with others reporting it!

1
Fant2OP•

Nope. It doesn't happen often as far as I can tell.

1
OnlySlightlyFamous•

Thanks for the quick response.

I'm gonna have to call ecobee. Mines doing it often enough that im having a hard time going through the menus without fighting the phantom inputs.

1