Help fixing sliced sneaker

I accidentally dropped a glass bottle onto my brand new sneaker this morning causing this large slice in the front, I've taken it to a shoe repair shop and the guy didn't know if anything could be done. So I'm reaching out to reddit! I don't need it repaired perfectly, if it could be less noticeable though (painted?) I think I could survive.

​

​

https://i.redd.it/objxw9qt99821.jpg

Posted Jan 3, 2019, 6:59 PM UTC

02
outcastarmory•

Bond the cut together with super glue. Then glue a thin patch (pig skin is ideal) on the inside. Sand of excess glue with about 800 grit sand paper. Paint or use white polish to blend. At least that's what I would do. If aesthetics didn't matter I would do a cross stitch instead of super glue.

1
LemmeSeeDemSoles•

Put your hand on the inside of the shoe and push-up underneath the cut, opening it a little bit. Put in a FLEXIBLE adhesive so that it can move with the foot as you break it in, and then take your hand out. The super glue the other guy mentioned will work fine, as long as it is flexible. My shop uses Boot-Fix and Shoe-Fix Glue because it is specifically designed for footwear.

Once you take out your hand, gently wipe the top of the shoe with a paper towel to remove the excess. A very small thin bead of glue is all you will really need. This will keep that split together, and keep it from getting worse.

To improve the color of the shoe, a simple shoe paint, spray dye, or box dye will work just fine. Money's-worth & Best is what my shop uses, it is a spray and very easy to apply.

And that should do it! It should look pretty decent after a nice spritz of white dye :-).

In the interest of transparency, I want you to know that I actually manage the company that distributes those glues, so take what I say with a grain of salt if you would like. But I ALSO manage a specialty shoe store and shoe repair, so I can promise you I do know what I'm talking about.

Best of luck to ya!

1