Need help with SMOK MAG

Help

Hi Guys,

​

I know it might be pointless, but I'm not the throw-it-away kind of guy and thought I'd ask around first. :) I've encountered a problem with my SMOK MAG today.

​

It seems the fire-button doesn't work anymore. It was stuck as seems to be a rather common issue with the device, so the automatic puff-control kicked in at 10 sec and stopped it. Now my fire-button is unresponsive, meaning it doesn't register the pushes anymore.

​

Has anyone encountered similar issues and if so, do you have a fix for it?

​

Thank you so much for your help!

Posted Jan 11, 2019, 9:40 AM UTC

25
allahfalsegodPerserker•

If the button is depressed you can pop it out. If it's semi-responsive you can open the case to remove debris. If it's poorly made get ready to do both at even increasing frequency.

2
AustrianGamerOP•

I'll crack her open once I get home. It doesn't seem to be depressed but it does wobble quite a bit when I try to fire it which it didn't before.

1

The trigger spring may have broke.

2
lestermagnetofimbulvetr •

perhaps detritus from pockets or leaked juice have gotten in the trigger. Try removing the batteries and getting some isopropyl in there and work it out a bit and see if that helps. might take a few tries, let dry out, insert batteries, give it a go....

be careful you don't get isopropyl all over the mod as iirc, it will act as a paint stripper on the enamel paint smok generally uses on their mods.

1
AustrianGamerOP•

Update:

It seems I got a "refurbished" (I wouldn't exactly call it that) Mod from my Offliner. I'll have to have some choice words with him.

I opened it up and found the part of the PCB that holds the switch which is pressed by the trigger hot-glued to the cover that holds the connector and tank. Once I loosened all screws it came loose the instant I opened it up. I looked it up and found that there's supposed to be an aluminum bracket to hold that part - which is missing, curiously. I don't know how you would go about breaking that off but there you have it...

Thanks for all your feedback guys. It seems I don't get around returning it. :(

1