Having trouble with new build.
So I just finished my second build for myself. Third overall build. Everything went together easily and the computer posted on the first try and I was able to install windows without an issue. The problem first arose when I tried to get my RAM speed to the advertised frequency. I suppose it is counted as overclocking the RAM but I've done it on a previous build and it caused no issues. After doing that my computer started freezing after a few minutes and would not unfreeze until and hard rebooted it. Then one time it gave me the BSOD "CLOCK_WATCHDOG_TIMEOUT". I assumed it was something I messed up with the RAM and after some Googling I was right. Seemed to have messed up the CPU when I did that. So I reset the BIOS to all the defaults and rebooted. The computer no longer gave the BSOD but still kept freezing when I was trying to install basic programs and drivers (Chrome, Steam, qbittorrent, 7zip, graphics drivers, chipset drivers, LAN and audio drivers, and aura sync). I finally decided to reinstall Windows to wipe it all out and try again. the reinstall went smoothly and quickly. So then I decided to not install anything until Windows update was finished. During the initial batch of updates, the computer froze. I hard rebooted thinking stupidly for some reason it was a fluke and continued updates. After a while I got impatient because I'm an idiot and started to install just basic drivers and Chrome. It all started working fine except the 1803 Windows update was taking forever to install. Thought that maybe restarting would install things in the background and make some room for it to install. Well, that's when it all went to shit. After restarting on that I got into the BSOD bootloop "CRITICAL_SERVICE_FAILED". There was no code accompanying it so I just googled the error and couldn't get a straight answer on what causes it. Can't boot into safe mode since it BSODs into that the same way. So that's where I decided to go to bed and where I still am now. Haven't reinstalled Windows again because I partially believe I can still fix this and the other part believes I need to just swap out some possibly bad parts but don't know which. Does anyone have any ideas or experience with this?
TL;DR: New computer started freezing every time I boot after "overclocking RAM", eventually got "CLOCK_WATCHDOG_TIMEOUT" and then stuck in "CRITICAL_SERVICE_FAILED" BSOD bootloop.
PC Specs:
CPU: Ryzen 7 2700X
MOBO: ASUS CCrosshair 7 Hero
RAM: 16GB G.Skill Ripjaws V 3000MHz
PSU: EGVA Supernova G3 750W
SSD: Samsung 970 EVO NVME 500GB
GPU: MSI R9 290X (I transferred this from my old build)
Posted Jan 19, 2019, 1:58 PM UTC
Did you enable DOCP/XMP or just set it to 3000mhz?
I just set it to 3000MHz which was most likely a mistake but worked on a previous build. I looked for the XMP option but couldn't find it.
Yea, that's not gonna work cause it needs 1.35v@3000mhz. Look for DOCP
That's what I thought but I did reset it all to default and am still having issues. Would it be having these issues even though the RAM is running at 2133MHz by default?
I would test the ram sticks and see if there are issues at stock speeds