r/tamagotchi•
Cborne

Drilling Tamagotchi Screws

Does anyone have experience drilling out stripped Tamagotchi screws and if so, what equipment was used? I was thinking about buying one with the screws stripped if I could find a small enough left handed drill bit or something for it but most of them seem way too big.

Posted Feb 6, 2019, 3:04 AM UTC

35
Wonderpuff•

I don't know about drilling, but I've read "life hacks" that you can get stripped screws out by putting a rubber band over the top of the screw and then putting the screwdriver into the rubber band. I guess the idea is the rubber grips on to whatever is left for the screwdriver to grab on to and get it out.

2
CborneOP•

I was thinking like for tamas where the head of the screw is too deformed or broken off from the tamagotchi (which I see fairly often). Has anyone ever saved them?

2
notwiththeflames•

I've never been able to pull that off. Maybe it works better with bigger screws than the ones vpets use.

2
CborneOP•

Same myself actually with small screws. I do have a small hand screw extractor kit but it only really works for situations where the screw head is still on and it's only stripped a little usually. It's a bit of a coin flip and doesn't work in a lot of scenarios so I was thinking a drill was basically it for vintage type screws (usually the only ones with major issues it seems). It's just that the diameter is so small I guess risk of breaking the bit would be high if one does exist. I just feel in the back of my mind there's gotta be some tool that can do it...

2
notwiththeflames•

I've heard people say that some kinds of jeweller's tools can be really helpful. Not sure what kinds, though.

2