2060 Performance/Installation
Hi guys!
I've just installed a 2060 into my system (i7-6700k, CX550m, 16GB DDR4 RAM).
And the performance is lacking to say the least. I'm only getting about 20 more FPS on Apex Legends than I did with my GTX 970. Please note I'm playing on MINIMUM settings.
What's more, it's really unstable, it goes anywhere from 90-150 FPS, rarely goes to 150 though.. My 970 was fairly stable at about 110 previously. This is a problem because I upgraded mainly for Apex.
To further back this up, I have done some benchmarks. And it seems my GPU is performing far below the average 2060 (28th-35th Percentile). CPU seems to be fine.
Now I have a couple questions and things I tried.
- When I installed, I used a 6+2 PCI-E connector for the 8-pin RTX 2060 card. Is that ok? It's not failing to withdraw the amount of power it needs, is it? Or would it even boot if it wasn't alright?
- I definitely did use DDU
- I've tried multiple drivers.
- Temperatures are fine.
Is there anything else I'm meant to do when installing a new GPU? I don't need any sort of software other than drivers do I?
Posted Feb 11, 2019, 12:22 AM UTC
install afterburner and max out the power target slider and see if that will make any difference. most 8 pins are 6+2 as some gpus only need a 6 pin power connector. While you are on afterburner, enable the osd so you can see if your cpu is now a bottleneck due to your minimum settings which I doubt
I don't see a Power Target slider. There's a "Power Limit" would that be the same thing? Haven't used AB before, thanks.
that's the one