Looking to RGB mod an RF only TV, but the Jungle IC has a shared line for Blue and Blanking

Hey!

I'm looking to attempt an RGB mod on an RF only GoldStar 20" TV set. The set does have an OSD for channels/volume etc. It appears to have seperate chroma and jungle IC's. What appears to be the jungle chip, is the following chip.

https://www.digchip.com/datasheets/download_datasheet.php?id=492667&part-number=LA7674

What is different on this chip is that the blanking line seems to share the same line as the Blue. Anyone here think I can send both the proper voltage for blanking and the blue signal on this at the same time?

Posted Feb 26, 2019, 6:30 PM UTC

65
skumlos•

Well wouldn't you just DC offset your signal? I guess this wouldn't be a problem, and resistor values seem given in the datasheet.

1
munchluxe63Sony WEGA•

Judging by the resistor ratio there, it's biased to 0.6V if the blanking signal is 1V.

​

Of course, they give you the range, 0.5V to 1.1V.

1
Azoic101•

The rgb might just be digital inputs,do you have the service manual for it?

1
ottguy74OP•

No, the only service manual I have found is just the PCB layout portion. Its a pretty old TV. The datasheet for the jungle IC makes no mention at all of digital, so I'm hoping its analog.

I'm gonna tap in and see.

https://elektrotanya.com/lg_goldstar_cn-20b90_chassis_nc-4ja.pdf/download.html

1
Azoic101•

Cool,let me know how it turns out.

Funny thing is I have a old sharp tv that I found recently that shares the blanking signal with the B input as well.

1