What does a structural geologist do outside of oil & gas or mining? What kinds of non-typical jobs could a structural geologist excel at without requiring much additional training?

I see a lot of jobs for hydrogeologists, but I don't have any hydrogeology training (especially not in modeling software, etc.). I also see lots of jobs for environmental scientists, but I don't have training in remediation techniques, the relevant laws, or my HAZWOPER certification. What I do have is a master's degree in structural geology with a very broad educational foundation and lots and lots of field experience mapping and getting lost in the woods and accidentally running into bears. And that's it.

But I've given up on O&G and mining, at least for now, so I need to find something else... and fast. What other types of jobs are there that I might excel at with my degree in structural geology? What do structural geologists do when they're not hunting resources? How do I apply my degree to the more common, more readily available positions out there? Or, better yet, what little-known positions or companies are out there who could really benefit from having a structural geologist? Help me think "outside the box." I think someone might have taped mine up from the outside with extra strong packing tape, so I'm struggling a bit here.

Posted Feb 28, 2019, 4:59 PM UTC

834
tpm319•

What about normal geology roles and not specifically structural geo? For entry level enviro, they will train you on a lot of that stuff.

​

Doing geotech work in CA sometimes involves faults and such.

8
GeolosopherOP•

I've seen a lot of geotechnical positions that want mostly engineering degrees / backgrounds, so I haven't paid much attention to them, and the few that I've seen who are willing to interchange geology and engineering want some (3-5+ years) experience. But I would love to work with faults, no question. I'm intimidated by CA's cost of living, though, so I haven't been applying to CA jobs with quite as much gusto as I have with jobs in other locations.

I've applied for a number of entry level environmental positions, but have been rejected from all of them, so that's why I ask about my degree specifically. I'm not sure why I didn't qualify for the jobs (well, technically, I did - I met every listed qualification easily), but I'm guessing my area of expertise didn't "align with their goals for the position." So now I'm trying to be more specific in the jobs I apply for, looking for work that would utilize structure specifically.

But I am 1000% open to normal / general geology positions. They just don't seem particularly open to me.

1
tpm319•

CA has an Engineering Geo stamp, (does not require an engineering degree) so I would argue that Faults + Eng. Geo stamp makes it a above average place to work. But, your spot on with cost of living.

​

How does your resume look? I would probably de-tune niche structure stuff, and emphasize general geology skills.

​

Lastly, if your applying for jobs 10+ hours away, and not doing any networking, that will be the bigger issues and not your skills in structure or w/e.

​

Whats your current work experience like?

5
GeolosopherOP•

Yeah, I'm definitely more than 10 hours away from CA, haha.

My resume is OK, I think (I submitted it for review here a while ago, and I was given a very positive response and made all the suggested changes), but I'll submit it again if you think that's helpful.

As for experience, I've got nothing. I have two years of laboratory work experience in a non-geology job, and I have several "seasons" (I don't know the total amount of time, but I've spent 100+ days, probably significantly more, out in the field doing geologic mapping entirely on my own) of fieldwork experience, but I've never had a job in geology... or in hardly anything else, either.

1
tpm319•

Feel free to re-post, but I bet it's networking and being a non-local thats getting in your way.

​

​

2
allin_crash•

Yup- what tpm said.

I have managed projects which I've actually used geology- global stability assessments, escarpment studies, fault studies and mapping.. It's not oil and gas money but it's decent.
Just search for any and all Geotech firms, I got my job by emailing a PG at the company and he was super cool.
Even if it means being a CMT Field Tech for a while (what I did) just to gain experience is worth it.

3
GeolosopherOP•

Thanks for the advice. When you look for a "geotech" firm, what kinds of positions should I look for, exactly? I mean, what kinds of job titles are there in the geotechnical world? I'm not very familiar with it and I'm not sure how to differentiate between, say, a geological engineer vs. a geotechnical engineer vs. a geologist, etc. (for example, what is a CMT Field Tech, and what would he/she do?). The terminology can be a bit intimidating at times.

2
allin_crash•

Apply for everything you are qualified for.
Google Geotechnical Field Tech and just read the job description.

It's probably not what you want to hear but you won't start out as a PM right away.
It took me about 1.5 years where I want to be career wise and I've been in Geotechnical (as a geologist) for about 5.

3
muscoviteeyebrows•

Sometimes the trick to get into geotech is to apply to any geologist position a firm that its core business is geotech.

Have you gone to local professional meetings? Putting a face to a name is very helpful.

Yes CA uses a lot of structural geologists due to lots of faults and such. Honestly anywhere with mountains will use structural geology in the geotech world. Look up state's department of transportation jobs if you are open to public service.

3
GeolosopherOP•

Thanks for the advice. I haven't spent much time at local meetings, but there also aren't many geology jobs in my state, unfortunately. To clarify, when you say "geotech," what exactly do you mean? What would a "geotech" business do (vs. some other type of consulting business, like remediation)? I wasn't given much - any - insight into the professional world at my university, so this is all unfamiliar territory to me and I haven't learned the exact meanings of the terms used yet.

3
muscoviteeyebrows•

Geotechnical engineering. There are engineering firms/consultants that do this type of work. Sometimes these companies do both remediation and geotechnical or one or the other. Also state agencies that have to investigate, design, and build infrastructure employ geotechnical types. Agencies such as Dept of Transportation for bridges and highways; Dept of Water Resources for water supply infrastructure. "Engineering Geologist" would be a good search term.

3
Atomicbob11Environmental Geology•

If you're not getting interviews but you think you're totally qualified, it's likely a combination of bad luck and/or resume. Try posting for advice here.

1
SopapillaPoppy•

What kind of/how much work experience do you have? And is your degree literally in structural geology or is your degree in geology and you happened to be educated mostly in structural? My masters was focused on structural and geomorphology but I got a job in environmental. It took me ages to find a job and I was rejected from 50+ jobs simply because of my lack of work experience. But with environmental, they know they have to train pretty much everyone anyways. Generally they’re not looking for particular field skills, they’re looking for attributes and attitude. For example, are you willing to work long, hard days in the field, are you a problem solver, how do you view safety, or how do you handle stressful situations. It’s all about proving how what you have done, even if it’s not remotely related to what you’ll be doing, illustrates your non-technical skills and attributes. You have lots of field experience, great! Leverage what that has taught you.

4
GeolosopherOP•

Thanks for the suggestions. I don't have any work experience, although I do have lots and lots of field experience from my master's thesis (I had to create a geologic map of my quadrangle, for which there was no detailed, professional quality map previously). I've applied to several local environmental positions, but I've been rejected for each of them, and I'm not sure why. I don't know if I asked for too much money (I just don't answer the salary question if it's an option, though) or if they want bachelor's instead of master's degrees or... I just don't know. But I also suck as using corporate jargon, so I don't talk a lot about my "attitude" or "problem-solving skills," etc. Maybe I just need a more, uh, let's see, synergistic cover letter? Is that a word? I'm honestly willing to try anything if it might possibly help. It honestly feels like there's some secret mark on my permanent record that I don't know about that these employers are seeing when they look me up. I just don't know how to explain why I'm not even being interviewed for positions that I'm definitely, clearly, excessively qualified for...

2
tpm319•

Post your cover letter!

​

How many jobs have you applied too?

2
GeolosopherOP•

I have several versions of it, and I'll need to re-write each of them so that there's not personally identifying information in it (I'm also concerned that an employer could copy and paste parts of it into Google and see this post, then check my history and find something - likely politically related - that they don't like and decide not to hire me, so I'll have to do some heavy editing first). How should I submit them? Can I link to multiple files in a single Dropbox link? I'm not sure what the preferred method here would be.

1
space-rocks•

That comment history is definitely.... interesting.

2
tpm319•

Feel free to post on a throwaway username or w/e and dumb it down to whatever you feel comfortable with.

​

I would just post one.

​

How is your linkedin?

1
SopapillaPoppy•

I COMPLETELY understand. And now that I’m on the other side, I can tell you that it is most often simply your lack of work experience. Coming straight out of my masters it took me 8-9 months of job searching. 50+ applications and I only had 3 interviews. It’s extremely demoralizing and depressing after working your ass off to get your masters. Unfortunately, work experience trumps stellar academics generally. Just keep pushing, I had to apply all over the country before I happened to find a company willing to take a chance on me. You don’t need to know corporate jargon, just research common interview questions and suggested answers and think of how your experience applies and relates. You are the only proponent of yourself so you need to really know your skills, your positive attributes, even your shortcomings. Was there a time in the field that something went terribly wrong but you figured out how to solve it? One of my interview questions was to literally tell them about a time something went wrong, how I handled it and what I learned from it. Just know that trying to get an interview sucks and may take a while, but in the meantime, fully prepare to sell yourself once you have one. Why are you passionate about this industry? Do you enjoy being in the field? How do you handle conflict?

2
[deleted]•

[deleted]

1

Hmmm...I'm a structural geo in O&G, so not what you're looking for, BUT another structure guy I used to work with came from a job mapping faults for looking geothermal sources out in Nevada. Is that something you could look into?

2
GeolosopherOP•

That sounds incredible, actually. That would be damn near perfect. I'll look into that. Nevada has been recommended by other users here, too, so I'll definitely focus my search there for a while. Thanks.

1

Good luck! To be honest I have no idea how a person gets such a job, just that it exists and seems to make field geos happy :)

1