ZachAlt|R5 2600 4.2ghz|EVGA 1070 FTW|16GB 3466mhz|•

I tried it using HDMI out of my rx 480 (my 1070 is on the way back from an RMA) and ands software won't let me change it, says the custom resolution is not supported.

2
MoobyNetTerminalOP•

I can't verify performance on AMD products, everything I've tried it with was Nvidia-based, but a broad spectrum of desktop, laptop, and even a quadro card all worked.

1
ZachAlt|R5 2600 4.2ghz|EVGA 1070 FTW|16GB 3466mhz|•

Got my 1070 back today, and I got my TV to 75hz. Cool I guess?

1
MoobyNetTerminalOP•

And before anyone comes in naysaying, you can go to www.testufo.com and it will determine your refresh rate. I've personally noticed much smoother mouse input and quicker, sharper response in twitch shooters like CSGO. I've also noticed it seems to help reduce visible video artifacts in compressed video even if the video is only 30 or 60hz, so you'll see less blockiness when watching Youtube or other streaming sites.

1
ZachAlt|R5 2600 4.2ghz|EVGA 1070 FTW|16GB 3466mhz|•

I have an active 3d Samsung and can say this 100% does not work on my TV.

0
MoobyNetTerminalOP•

Did you try the method of right clicking desktop->nvidia control panel->change resolution on side bar->click "customize" under your standard resolution list->click "create custom resolution"->type in whatever hz you want to try and clicking "test"?

I've tried this now on 4 different computers including a custom PC desktop, a Dell laptop, an old Optiplex, and now a Macbook Pro in Bootcamp and I've tried it on a newer 4K HDTV, a 2013 1080p TV, and a built-in Macbook Pro monitor and they all worked with 120hz mode. I should note all methods tested with HDTVs was HDMI or DisplayPort to HDMI via an adapter, so I can't confirm if this will work with DVI or VGA connections.

You're either not using the right method like I described above, you're doing something majorly wrong, or you're lying flat out. The only thing I've tried that hasn't worked so far was 4k/120 on my 4K HDTV and that's likely mostly because HDMI can't push that many pixels, I just wanted to see what would happen.

1