Q802USB - Headphones & Speaker outputs.
Hi, first time here.
I've been using my Q820USB for quite a while, but only today setup my speaker system again. What I'd want to happen is to have my headphones and my speakers plugged in so I can easily switch between them at a moments notice.
However any attempt to do this has ended up with the speakers not playing sound.
Anything I'm overlooking? Or is this just not really possible?
Kind regards,
Posted Mar 19, 2019, 10:02 PM UTC
13
Can't find a manual easily right now, but from the pictures here it looks like it has separate outputs:
Have you tried plugging headphones into PHONES and speaker plugged into MAIN OUT, then using the two knobs to control the volume?
In my experience, most mixers are set up so that you can use the headphones without disturbing the main mix, so it seems like that should work.
Yeah I've tried all of that to no avail. I'll tinker with it today
[deleted]
Ok, I've got it so my Speakers are in the Headphones slot and my headphones in the Left slot of the Main Mix - Obviously will need a splitter to get the right to work. Without testing, not sure if that will yield actual left/right sound.
Edit: Managed to dig out the manual - says to put speakers in Main Mix. However as they're connected to the sound system I'll have to find an RCA to 3.5mm Jack cable (2:2)