Tubeless on 40c and smaller... Does it matter that much or is $120 best spent elsewhere?

I'm a past roadie, took a break for a couple of years and hopped back into cycling but mostly mountain biking. Obviously the benefits are huge on 2"+ tires as pressures are getting down there, but does it matter less the more narrow you go? It would take about $120 to replace my clincher MSO's 40's with the tubeless equivalent. Should I just ride these as they are or go tubeless off the bat? Or should I ride these and buy a decent Garmin instead?

Posted Mar 23, 2019, 7:29 PM UTC

17
Gffcom•

I think you can set upthe MSO 40 tubeless, but either way, tubeless is worth it for me. Yes lower pressures make a difference, yes self sealing thorn and goat head punctures are great in the desert. But there’s nothing wrong with wearing out the tires you have before switching over.

5
pedalstrike84OP•

Hey thanks! I've heard some horror stories trying to get the non tubeless variants to seal the mso's so I doubt I'll waste any sealant trying. Guess I could pull the stock MSO's and sell them for half of what a tubeless set would cost me if I wanted to mess with it.

I agree, I was a convert on the mtb. I do know if I ever got back into true road riding I doubt I would mess with it at 120psi but gravel is that gray area in between.

1
Gffcom•

The extra compliance of running at 30 psi vs 45 (or higher) psi is noticeable. Better traction as well

1
pedalstrike84OP•

Great point! One point for tubeless!

1
ephrion•

My first experience with tubeless was on a gravel wheelset, running 40mm WTB Nanos. I was used to Clement USH 35mm tires on clinchers. In Colorado, there are goat head thorns everywhere, and my first non-paved ride hit me with a flat about 2 miles in. Local gravel group rides state up front that you basically need either tubeless or slime tubes. I bought some slime tubes and didn't have any flat issues after that, but the tubes were pretty heavy. I was running around 60-70psi, and the ride quality was kinda harsh on more technical gravel/easy mountain bike trails.

I got curious about tubeless setups, so I got a Hunt wheelset and some WTB Nanos. I got 5mm more tire and significantly more tread, and lost a tiny bit of weight in the process. It made a pretty huge difference. I could run 40-50psi on pavement and be pretty dang quick, or I could run 25-35psi on dirt/gravel and have a cushy and grippy ride. The sealant solved most of the punctures that happened on the tires. I got about a thousand miles before a Jeep road with huge sharp rocks ended up giving me a huge sidewall tear that the sealant wouldn't fit.

Since then, I've done tubeless with 28mm Schwalbe Pro One tires on my road bike, and they were awesome. I've got 35mm Compass Bon Jon Pass tires setup tubeles, and they rule.

The only downside to a tubeless tire setup is that changing tires is significantly more work. If you're used to changing road/gravel tires for different rides, you'll have a much harder time doing so with a tubeless setup.

3
Adamarr•

Just gotta go one step further and swap wheels!

1
HeavyTeva•

I attempted to setup my tubed MSO 40's as tubeless but had problems. I got them to seat with no issues, but the sidewalls leaked like a sieve and did not seal: bleeding out Orange Seal. Over time it might of worked, but it was not worth the risk. I have good luck setting up other tubed (non-tubeless) tires, but not the MSO's.

1