[HELP] Sapphire Pulse RX580 : mouse&keyboard lags only in HDMI
Hi folks,
It took me nearly 6 months, but I finally managed to find something that does not work well with my i5-8600/Z370N-WiFi/RX580 hackintosh! ;)
Here is the thing: when I use a DisplayPort cable for the video, everything is fine. But when I try to use any HDMI port, the machine works but keyboard & mouse are frozen for about 1 second every 3 seconds... which makes it not quite usable.
I did some research on this forum, but could not fin anything. I have also tried a few tricks with no success, and here are a few remarks that could help with diagnostics:
- The Saphhire Pulse 580 (8GB) has 2 DP an 2 HDMI ports, all of them behaves the same: DP is OK, HDMI is not (I cannot test the DVI port)
- I tried using another HDMI cable
- I tried a DP->HDMI converter to plug the monitor on a DP port --> no luck
- The freeze seems to affect only USB inputs (mouse & keyboard): audio and video are not affected
- The problem appears both when the HDMI monitor is alone AND when both are connected
- The problem appears only in macOS, not in Windows nor in UEFI/Clover at boot
- During the freezes, the "kernel_task" uses one CPU core at 100%
- I chose my video card based on recommendations, and am using Lilu+WhateverGreen , no injection configured in Clover
I would like to use a HDMI connector for a second monitor that does not support DP, so I hope someone has an idea! The machine is on Mojave 10.14.3, I hope to try an earlier version soon if I can find a spare disk to test.
Thank you all very much !
Hardware :
- Motherboard = Gigabyte Z370N-WiFi
- CPU = Intel i5-8600
- Graphics = Sapphire PULSE Radeon RX 580 8GD5
Posted Mar 27, 2019, 1:41 PM UTC · edited
We’d need a bit more info to help though it seems you know what your talking about so I won’t patronize you on that. It’s help to know the following:
My first guess when I see this is usually an improperly filled out SMBIOS but can’t say for certain without some more info
I have added my hardware:
I prepared my machine by following a similar build on the TonyMac forum. For SMBIOS, I have pretty much generated a random profile for iMac 18,3 which seemed like corresponding the best with my config. For graphics, I used only Lilu+WhateverGreen. The resolution is 2560x1440 but the problem was the same in 1920x1080.
You only answered one of my questions, the rules mentioned install method and guide used plus I’d like to know the other things I mentioned as well