r/3Dprinting•
Nopped

MakerBot slicer issue

Discussion

Printer: MakerBot Replicator 2 Slicer: MakerBot Print 4.0 Part: https://imgur.com/gallery/mgHqNvn

I have a model I made in DesignSpark Mechanical that won’t print directly on the bed and the bottom face is nonexistent because there is one empty layers worth of room where the edges were put down but not filled in I have tried realigning parts in DS Mechanical but the issue still happens. Are their any slicers compatible with the Replicator 2 that may fix the issue? Any help is much appreciated.

Posted Apr 3, 2019, 11:07 PM UTC

15
lf_1•

A Replicator 2? That's old enough that you can get rid of MakerBot's shitware and use Cura. Just get the GPX plugin.

Actually you can use any slicer with OctoPrint and the right plugin if that's preferred.

2
NoppedOP•

I’ll give it a try

1
NoppedOP•

Any ideas on finding a profile for the Replicator 2?

1
lf_1•

There seems to be one from a long time ago at https://github.com/tchapi/CuraForMakerbots/blob/master/Cura_Makerbot_standard_profile.ini

At the very least you can probably read through it and set the settings as shown in there.

2
NoppedOP•

Thanks 🙏

1