Cartridges

I would maybe try the real deal first. That way you can better gauge what you've actually bought.

Equipment

• Crock-Pot
• 2 oz shot glass
• Thermometer
• 1 CCELL Battery (https://hamiltondevices.com/product/ccell-silo-battery-black/)

Materials

• 500mg DMT (I recommend the GordoTEK for the very high level of purity)
• .5 ml LIQUIFY PRO (https://www.theterpenest...?variant=18919800143990)
• 1 ml blunt tip syringe (https://www.dudadiesel.com/choose_item.php?id=Syringepk001)
• 1ml glass CCELL tank (TH210) (https://hamiltondevices.com/product/10ml-ccell-gold-glass-vaporizer-cartridge-with-threaded-gold-round-mouthpiece-th210/)

Directions

1. Microwave 2 cups of water in a microwave safe container (glass) for 3 minutes.
2. Pour your hot water into your crock-pot and turn the dial to high.
3. Combine 500 mg DMT with .5 ml LIQUIFY PRO in the 2 oz shot glass.
4. *optional* add .06 ml (roughly 3 glass dropper drops) of an additional flavored terpene to enhance the taste.
5. place the shot glass into the crock pot.
6. Use a 1 ml blunt tip syringe to mix the solution for 7 minutes over medium heat (120-140 degrees).
7. After 7 minutes, use the syringe to transfer your mixture into a 1ml glass CCELL tank (TH210).
8. Combine the DMT vape cart with a any CCELL battery (CCELL Palm or CCELL Silo)
9. Prepare for take off.

*Notes*

I have various experience with Terps, PEG, & PG when making THC carts and terpenes always make a much better product. Terpenes are generally much more non-polar than PEG & PG and theoretically should dissolve the DMT much more easily and reduce any potential for crystallization.

In particular, I've compared theterpenestore (terpenes) to waxliquidizer (a pg/peg mix) and theterpenestore blows the waxliquidizer out of the water in terms of quality (for THC only carts, I've yet to try the DMT mix with a PG/PEG solution).

When comparing THC carts that were made with PEG/PG vs a Terpene solution, the PEG solution tends to have the following issues:

• The solution appears more susceptible to separation over time.
• The mixture burns unevenly (the THC in the solution vapes at a lower temperature (347F) than the PEG/PG (460F) and causes a black resin to appear close to the coil.
• The PEG/PG solution creates more of a dirty/filmy sensation in the mouth.
• It also seems that PEG/PG gets a bad reputation for vaping ("A study from 2010 showed inhaling propylene glycol can exacerbate asthma and allergies, and multiple studies have shown that propylene glycol and polyethylene glycol break down into the carcinogens formaldehyde and acetaldehyde — especially when vaped at high temperatures.”)

I prefer dabbing and having at least one sitter/ helper. You can do a tiny hit to numb the lungs first. But then you can ingest up to large amounts with dabbing if so desired.

That would all depend on the legality of the product, and the availability of materials. I would never suggest doing anything that would be unlawful in your area.

Made a cart. Hate it. I think it was a waste of awesome. Sandwich or ceramic doughnut is the way to fly. Dab rigs to but that's way too much extra shit